防城港科目四英文试题

1. The guide arrow on the road surface of this lane indicates that only left turns are permitted at the intersection ahead.

A. Right

B. Wrong

Answer: B

2. The solid yellow line on the curb indicates that temporary stopping or parking is allowed at the roadside.

A. Right

B. Wrong

Answer: B

3. When a motor vehicle temporarily stops at night, which lamp should be turned on?

A. Front and rear fog lamp, clearance lamp and rear position lamp

B. Head lamp, clearance lamp and rear position lamp

C. Hazard lamp, clearance lamp and rear position lamp

D. Reverse lamp, clearance lamp and rear position lamp

Answer: C

4. Which one of the following measures is correct when a motor vehicle intends to overtake but the vehicle in front refuses to yield?

A. Use a long-sounding horn

B. Follow the vehicle in front while turning high-beam

C. Wait for it to yield while keeping a safe distance

D. Use high-beam and low-beam alternatively

Answer: C

5. As shown in the flash, what should the driver do when the motor vehicle encounters this situation?

A. Speed up and pass rapidly

B. Stop immediately

C. Sound the horn to indicate the pedestrians to yield

D. Observe the movement of pedestrians and non-motor vehicles before passing

Answer: D

6. Drivers are not allowed to drive on or across these filled-in slanted yellow lines.

A. Right

B. Wrong

Answer: A

7. Motor vehicle drivers may make a U-turn in the broken line area as long as it will not affect the normal traffic flow.

A. Right

B. Wrong

Answer: A

8. The guide arrow on the road surface of this lane indicates that only right turns are permitted at the intersection ahead.

A. Right

B. Wrong

Answer: B

9. When driving a motor vehicle into a traffic flow, drivers should not hold up other vehicles.

A. Right

B. Wrong

Answer: A

10. The sign on the right indicates that drivers should choose their lanes in accordance withthe directions indicated by arrows.

A. Right

B. Wrong

Answer: A

11. What kind of harmful effect will be brought about by continuously using the foot brake on a long downhill road?

A. Shorten the engine’s service life

B. Make the driver feel tired

C. Easily cause the vehicle to overturn

D. Reduce the braking efficiency

Answer: D

12. When encountering a road like this, motor vehicle drivers should downshift in advance to maintain the dynamic of the motor vehicle.

A. Right

B. Wrong

Answer: A

13. How many kinds of law-breaking acts are displayed in flash 2?

A. One

B. Two

C. Three

D. Four

Answer: B

14. If a driver finds there is no vehicle behind, he may change lanes without turning on the indicator.

A. Right

B. Wrong

Answer: B

15. The sign on the right indicates that sounding the horn is prohibited here.

A. Right

B. Wrong

Answer: B

16. Drivers may turn left when seeing these hand signals.

A. Right

B. Wrong

Answer: A

17. After speeding up to more than 60 km/hour, a motor vehicle driver may drive onto the driving lane directly.

A. Right

B. Wrong

Answer: B

18. For a temporary stop on a foggy day, the driver should only turn on the fog lamp and the low-beam

A. Right

B. Wrong

Answer: B

19. When passing an intersection, vehicle motor drivers are not allowed to overtake.

A. Right

B. Wrong

Answer: A

20. It is correct for the driver to drive on an expressway in the way shown in the flash.

A. Right

B. Wrong

Answer: B

21. What should the driver do when seeing these hand signals?

A. Go straight and pass through the intersection

B. Pull over

C. Drive to the waiting area for turning left

D. Turn right at the intersection

Answer: D

22. The sign in front indicates a one-kilometer distance from the next left exit.

A. Right

B. Wrong

Answer: B

23. When driving on an expressway, where should the driver park?

A. The service area

B. The acceleration lane

C. The deceleration lane

D. On the ramp

Answer: A

24. The sign on the right warns drivers to yield for oncoming motor vehicles.

A. Right

B. Wrong

Answer: B

25. How to ensure motor vehicles have sufficient power when driving uphill?

A. Downshift before reducing speed

B. Downshift after reducing speed

C. Downshift when the speed is excessively low

D. Downshift to the fullest extent

Answer: A