达州2026科目一考试英文版

1. How to pass this intersection?

A. keep the speed and go through

B. honk to urge

C. reduce speed and go through slowly

D. speed up and go through

Answer: C

2. You should speed up to go through the railway crossing in this case.

A. Right

B. Wrong

Answer: B

3. What is the max speed on this highway?

A. 30km/hr

B. 40km/hr

C. 50km/hr

D. 70km/hr

Answer: D

4. Whats the meaning of this sign?

A. lanes for going in different directions

B. lane for both U turn and left turn

C. the lane of no left turn and no U turn

D. lane for both going straight and left turn

Answer: B

5. What kind of violation does the vehicle have while temporarily stopping by the roadside?

A. stop in the crosswalk

B. stop more than 30cm from the roadside

C. stop in the section with no stopping marking

D. stop occupying the lane for non-motorized vehicles

Answer: A

6. Whats the meaning of this sign?

A. emergency shelter

B. service area

C. pedestrian passage

D. crossing road facility

Answer: A

7. Whats the meaning of this sign?

A. reduce speed in tunnel

B. turn on the high beam lights in tunnel

C. turn on the light in tunnel

D. width light in tunnel

Answer: C

8. Reducing the speed when driving in sand, hail, rain, fog, ice and other weather conditions.

A. Right

B. Wrong

Answer: A

9. Whats the meaning of this sign?

A. embankment road

B. steep uphill road

C. continuous up slopes

D. steep downhill road

Answer: D

10. When a vehicle runs on a narrow mountain road, the driver should ______ if the party close to the mountain mass refuses to yield.

A. Honk to urge the other party to yield

B. Maintain the normal speed

C. Reduce speed or stop to yield

D. Use the left lane and pass with care

Answer: C

11. The main feature of pedestrians participating in road traffic is that _________.

A. They move slowly

B. They like to get together and look on

C. They walk around at will and can easily change directions

D. All the above

Answer: C

12. Whats the meaning of the diamond broken lines on the road?

A. road construction marking

B. vertical deceleration marking

C. horizontal deceleration marking

D. fewer lanes indication marking

Answer: B

13. The starter works when turning the ignition switch to the ACC position.

A. Right

B. Wrong

Answer: B

14. Driving a motorized vehicle on the road in violation of road traffic regulations shall be subject to relevant punishment.

A. Right

B. Wrong

Answer: A

15. Whats the meaning of this sign?

A. Passing on both sides

B. Passing by the right side

C. Passing by the left side

D. Passing is prohibited

Answer: C

16. Whats the meaning of this sign?

A. slippery section

B. sharp curve

C. test driving section

D. curve section

Answer: A

17. A motorized vehicle is not allowed to make a U turn at the level crossing, bridge, steep slope, tunnel or dangerous road section.

A. Right

B. Wrong

Answer: A

18. A motorized vehicle driver who violates of traffic lights is subject to a 6-point penalty.

A. Right

B. Wrong

Answer: A

19. What is this manipulation device?

A. the handbrake

B. the air throttle lever

C. the gear lever

D. the clutch lever

Answer: C

20. Which of the following vehicle in front in the same lane is not allowed to be overtaken?

A. the vehicle is making a stop

B. the vehicle is reducing speed to yield

C. the vehicle is taking a U turn

D. the vehicle is running normally

Answer: C

21. After a tire blows out and before the driver can control the speed of the vehicle, he should refrain from using the foot brake to stop the vehicle. Otherwise, a horizontal swing of the vehicle can cause greater danger.

A. Right

B. Wrong

Answer: A

22. Whats the meaning of this sign?

A. line guide signs

B. lane merging guide signs

C. lane branching guide signs

D. turning guide signs

Answer: A

23. Whats the meaning of this sign?

A. lane direction indication

B. intersection ahead

C. lane information indication

D. road branching point ahead

Answer: B

24. Motor vehicle frontal collision, the double protection of the airbag and the safety belts can give full play to the role.

A. Right

B. Wrong

Answer: A

25. It lights to indicate that ______

A. front and rear width lights light on

B. front and rear width lights light on

C. left-turn signal flashes

D. right-turn signal flashes

Answer: D