阿拉善盟英文科目四考试题库

1. What is the meaning of the sign on the right?

A. Drive on the right side of the road ahead

B. No entry ahead

C. One-way road ahead

D. Watch for the right-hand intersection ahead

Answer: C

2. The sign on the right indicates that driving along left side only.

A. Right

B. Wrong

Answer: A

3. The cross-hatched marking indicates an area where vehicle drivers are not allowed to stop.

A. Right

B. Wrong

Answer: A

4. A driver should speed up when passing through road sections with this traffic marking.

A. Right

B. Wrong

Answer: B

5. The sign on the right indicates a one-kilometer distance from ETC toll station ahead.

A. Right

B. Wrong

Answer: B

6. Which one of following ways is the safest when driving a motor vehicle on this road?

A. Driving along the central line of the road

B. Driving along the right side of the road

C. Driving at the middle of the road

D. Driving along the left side of the road

Answer: B

7. Under such circumstances, what should be done by a motor vehicle driver in order to yield out of courtesy?

A. Driving at a higher speed

B. Closely following the vehicle in front

C. Driving at a higher speed by the right side

D. Driving at a lower speed by the right side

Answer: D

8. The sign on the right indicates that the speed limit is 50km/hour.

A. Right

B. Wrong

Answer: B

9. When encountering this situation on a mountainous road, motor vehicle drivers should overtake the vehicle in front by speeding up.

A. Right

B. Wrong

Answer: B

10. The sign in front indicates a one-way lane after turning right.

A. Right

B. Wrong

Answer: A

11. When encountering such pedestrians, motor vehicle drivers may continuously sound the horn to alert them to yield.

A. Right

B. Wrong

Answer: B

12. The sign on the left indicates U-turn is allowed here.

A. Right

B. Wrong

Answer: A

13. At this moment, the driver may speed up and pass the intersection rapidly.

A. Right

B. Wrong

Answer: B

14. What should the driver do when seeing these hand signals.

A. Stop and wait

B. Go straight and pass through the intersection

C. Turn right at the intersection

D. Turn left at the intersection

Answer: A

15. When the electric equipment and gasoline of a motor vehicle catches fire, the driver may extinguish the fire with water.

A. Right

B. Wrong

Answer: B

16. What should the driver do upon finding a burst rear tire?

A. Adjust by swiftly turning the steering wheel

B. Control the direction while reducing speed slowly

C. Swiftly turn the steering wheel to the opposite direction

D. Swiftly take braking measures

Answer: B

17. When the motor vehicle encounters a crosswalk in this situation, the driver may speed up and pass rapidly.

A. Right

B. Wrong

Answer: B

18. The sign on the right indicates that the speed limit of 40km/hour is lifted on the road ahead.

A. Right

B. Wrong

Answer: B

19. What should be done by motor vehicle drivers in order to yield politely to such pedestrians?

A. Speed up and bypass in front of the pedestrians

B. Speed up and bypass from behind the pedestrians

C. Reduce speed or stop to yield

D. Continuously sound the horn to alert the pedestrians

Answer: C

20. This sign warns of an intersection of railways and highways ahead.

A. Right

B. Wrong

Answer: A

21. This road marker indicates that the minimum speed for this road section is 60 km/hour.

A. Right

B. Wrong

Answer: B

22. The sign in front indicates a 2-kilometer distance from the destination of the highway ahead.

A. Right

B. Wrong

Answer: A

23. The slow-down-and-yield line at the intersection ahead indicates that vehicle drivers should stop and give the right of way to vehicles on the trunk road.

A. Right

B. Wrong

Answer: B

24. What should be done first after getting into the vehicle?

A. Observe the surrounding traffic situation

B. No need to observe the traffic situation around

C. Open the door and get in directly

D. Take note of the weather

Answer: A

25. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D