青岛科目一考试英文版

1. How to do while entering this intersection?

A. shift the high and low beam lights alternately to remind the cars already in the intersection to yield

B. quickly cut in the cars already in the intersection

C. let the cars already in the intersection go first

D. honk and enter directly

Answer: C

2. When a vehicle stops for a long time, the driver should select a car park to do so.

A. Right

B. Wrong

Answer: A

3. When a vehicle enters a two-way tunnel, the driver should turn on ________.

A. The hazard lights

B. The high beam light

C. The fog light

D. The width light or the low beam light

Answer: D

4. A motorized vehicle is not allowed to make a U turn at the level crossing, bridge, steep slope, tunnel or dangerous road section.

A. Right

B. Wrong

Answer: A

5. It lights while driving to indicate that ______

A. engine temperature is too high

B. engine cooling system malfunction

C. engine lubrication system malfunction

D. engine temperature is too low

Answer: A

6. Whats the meaning of this sign?

A. no yielding

B. yield while crossing each other

C. reduce speed and yield

D. stop to yield

Answer: C

7. Whats the meaning of this sign?

A. no left turn

B. dead-end road

C. no passing

D. bypass if overheight

Answer: D

8. Whats the meaning of this sign?

A. yield if going to turn left

B. straight one-way road

C. right one-way road

D. left one-way road

Answer: D

9. It lights to indicate that ______

A. the hazard lights flash

B. right-turn signal flashes

C. left-turn signal flashes

D. front and rear width lights flash

Answer: A

10. A motorized vehicle is not allowed to stop in the section 50 meters to the intersection.

A. Right

B. Wrong

Answer: A

11. Whats the meaning of this guide arrow?

A. going straight and U turn are allowed ahead

B. left turn and U turn are allowed ahead

C. going straight and changing to left lane are allowed ahead

D. going straight and left turn are allowed ahead

Answer: B

12. Whats the meaning of this sign?

A. no going straight and no changing to left lane

B. no going straight and no left turn

C. allowed to go straight and turn left

D. no going straight and no right turn

Answer: B

13. Use the high and low beam lights alternately when passing the crosswalk at night.

A. Right

B. Wrong

Answer: A

14. Whats the meaning of this sign?

A. watch for two-way road

B. driving by either side of the road

C. watch for variable lane

D. variable lane

Answer: C

15. Reducing the speed to yield when encountering this situation in the intersection.

A. Right

B. Wrong

Answer: A

16. How to use lights in this weather condition?

A. use high beam lights

B. use fog lights

C. not use any light

D. turn on the right-turn signal

Answer: B

17. When the tire pressure is too low, the fast-running tire can change its shape like waves and increase its temperature, which in turn can cause ________.

A. Even lower tire pressure

B. Increases resistance to the vehicle

C. Tire blowout

D. Unstable tire pressure

Answer: C

18. The three principles for careful driving are concentration, careful observation and early prevention.

A. Right

B. Wrong

Answer: A

19. At night, the drivers observation is markedly poorer than in the daytime and the range of visibility range is _______.

A. Unchanged

B. Irregular

C. Longer

D. Shorter

Answer: D

20. How to drive through the intersection without traffic lights?

A. reduce speed and go slowly

B. speed up and pass

C. let large vehicle go first

D. let the left vehicle go first

Answer: A

21. Whats the meaning of this sign?

A. tunnel entry

B. observatory

C. mind side wind

D. wind vane

Answer: C

22. How to use lights when entering the speed-reducing lane?

A. turn on the hazard lights

B. turn on the head light

C. turn on the left-turn signal

D. turn on the right-turn signal

Answer: D

23. A motorized vehicle is not allowed to stop in the section 50 meters to the narrow road less than 4 meters width.

A. Right

B. Wrong

Answer: A

24. Does not affect normal driving when it lights

A. Right

B. Wrong

Answer: B

25. It lights to indicate that ______

A. not buckled up

B. safety belt malfunction

C. the safety belts are too loose

D. buckled up already

Answer: A