阜新考驾照英文试题

1. Whats the meaning of this sign?

A. embankment road

B. cliffside road

C. waterside road

D. slippery road

Answer: A

2. What is this traffic sign?

A. Road narrows on both sides

B. Road narrows on the right side

C. Road narrows on the left side

D. Bridge narrows

Answer: C

3. Pull down the switch of the turn signal, right-turn signal is on.

A. Right

B. Wrong

Answer: B

4. Whats the meaning of this sign?

A. no left turn

B. leftt and right turn

C. no leftt and right turn

D. no right turn

Answer: B

5. After a vehicle enters the ramp, the driver should swiftly increase the speed to more than 60 kilometers per hour.

A. Right

B. Wrong

Answer: B

6. What is the max speed on this highway?

A. 70km/hr

B. 50km/hr

C. 40km/hr

D. 30km/hr

Answer: C

7. A vehicle is not allowed to reverse on the ramp of an expressway.

A. Right

B. Wrong

Answer: A

8. A small bus driver should reduce speed rapidly when he suddenly feel bumpy on a flat expressway, to prevent tire blowout.

A. Right

B. Wrong

Answer: A

9. How long can a driver drives without rest?

A. less than 6hrs

B. less than 8hrs

C. less than 10hrs

D. less than 4hrs

Answer: D

10. The doors of both sides are not closed if it lights.

A. Right

B. Wrong

Answer: A

11. This set of the hand signals of the traffic police indicates that the vehicles should ___ .

A. wait to turn left

B. pull over

C. turn right

D. reduce speed and pass slowly

Answer: C

12. Whats the meaning of this sign?

A. overflowing bridge

B. ferry

C. pier

D. overflowing road

Answer: B

13. Whats the meaning of the white broken lines area on the far left side?

A. special lane for multi-passenger vehicles

B. special lane for small buses

C. special lane for taxis with no passenger

D. special lane for large buses

Answer: A

14. How to use light in this situation at the intersection?

A. turn off high beam lights

B. use hazard lights

C. use the high and low beam lights alternately

D. use high beam lights

Answer: C

15. When encountering stopping in turn or slow-moving vehicles in front at an intersection where lanes are reduced, the motorized vehicle should _________.

A. enter the intersection from road shoulder by the right side of the vehicle in front

B. enter the intersection from the side of interspace

C. pass alternately with one vehicle each lane to enter the intersection

D. change to left lane and cut in to enter the intersection

Answer: C

16. It lights to indicate that ______

A. the tail fog light is turned on

B. the low beam light is turned on

C. the high beam light is turned on

D. the head fog light is turned on

Answer: A

17. This sign indicates one-way section ahead.

A. Right

B. Wrong

Answer: B

18. When crossing each other at night, how far should change the high beam lights to low beam lights?

A. not need to change lights

B. beyond 150m

C. within 100m

D. within 50m

Answer: B

19. What is the meaning of this sign?

A. provincial highway No.

B. national highway No.

C. county road No.

D. township road No.

Answer: A

20. This sign indicates jammed section ahead and passing slowly.

A. Right

B. Wrong

Answer: B

21. What is the max speed when passing a level crossing?

A. 15km/hr

B. 20km/hr

C. 30km/hr

D. 40km/hr

Answer: C

22. Can leave the expressway into the ramp from this location directly.

A. Right

B. Wrong

Answer: B

23. A vehicle should try to speed up after starting from the roadside and rapidly turn left into the traffic flow on the road.

A. Right

B. Wrong

Answer: B

24. When a motorized vehicle goes at night through an intersection that has no traffic lights, the driver should not use the high and low beam lights alternately.

A. Right

B. Wrong

Answer: B

25. How to drive through the intersection without traffic lights?

A. reduce speed and go slowly

B. speed up and pass

C. let large vehicle go first

D. let the left vehicle go first

Answer: A