玉溪驾照考试科目一英文版

1. When causing a road accident involving property damage, the parties to the accident have no dispute over the fact and cause, they should take photos of the scene or mark the vehicles location when they move the vehicles.

A. Right

B. Wrong

Answer: A

2. When starting up a vehicle stopping at the roadside, the driver should first ________.

A. Depress the accelerator pedal and start

B. Honk

C. Increase engine rotation speed

D. Observe the conditions around the vehicles

Answer: D

3. You may not use the turn signal when you change to the right lane.

A. Right

B. Wrong

Answer: B

4. A vehicle is not allowed to make a U turn on the ramp of an expressway.

A. Right

B. Wrong

Answer: A

5. When a vehicle leaves an expressway, it should reduce speed in the deceleration lane before entering the ramp.

A. Right

B. Wrong

Answer: A

6. Illegally assembled motorized vehicle can be drived on road as long as it is thought to be safe.

A. Right

B. Wrong

Answer: B

7. What device does the switch of this symbol control?

A. the windscreen wiper and washer

B. the rear window defrosting or defogging

C. the rear window wiper and washer

D. the windscreen defrosting or defogging

Answer: C

8. How to use lights when pulling over on road?

A. turn on the hazard lights

B. turn on the right-turn signal in advance

C. use the high and low beam lights alternately

D. not need to use any light to indicate

Answer: B

9. What marking is the white broken line on the road?

A. central line of opposite lanes which is prohibited from crossing

B. central line of opposite lanes which is restricted from crossing

C. central dividing line of the one-way road lanes

D. central line of same direction lanes which is allowed to cross

Answer: D

10. The main impact of muddy roads on safe driving is _________.

A. The resistance to the vehicle becomes weaker

B. The tires can easily spin and skid

C. The visibility become lower and blurs the field of vision

D. The road grip becomes stronger

Answer: B

11. This sign reminds bump road ahead which may causes bump phenomenon.

A. Right

B. Wrong

Answer: A

12. No turning left in this situation.

A. Right

B. Wrong

Answer: A

13. It lights to indicate that ______

A. the tail fog light is turned on

B. the low beam light is turned on

C. the high beam light is turned on

D. the head fog light is turned on

Answer: A

14. This sign indicates running slowly or stopping to let the vehicle on main road go first.

A. Right

B. Wrong

Answer: A

15. What device does the switch of this symbol control?

A. the windscreen defrosting or defogging

B. the rear window wiper and washer

C. the windscreen wiper and washer

D. the rear window defrosting or defogging

Answer: C

16. When a vehicle has increased its speed to more than 60 kilometers per hour on the ramp of an expressway, it may directly enter the carriageway.

A. Right

B. Wrong

Answer: B

17. The braking system may malfunction if it lights.

A. Right

B. Wrong

Answer: A

18. Whats the meaning of this sign?

A. bypass at construction section

B. two-way traffic

C. bypass from left or right side

D. watch for danger

Answer: C

19. When the two red lights at a level crossing flash alternately, the vehicles should stop to wait.

A. Right

B. Wrong

Answer: A

20. When reaching an intersection, the driver should _____ if a turning vehicle cuts in.

A. Stop to evade

B. Maintain the normal speed

C. Speed up and pass ahead of it

D. Honk and pass ahead of it

Answer: A

21. How to pass when encountering this situation at the intersection?

A. make sure it is safe to pass

B. turn right and speed up to pass

C. speed up and pass straight

D. turn left and speed up to pass

Answer: A

22. When encountering non-motorized vehicles cutting in on the road, the driver should ___.

A. Honk to warn

B. Speed up and pass

C. Reduce speed and yield

D. Suddenly speed up when approaching

Answer: C

23. When driving at night, the driver should reduce speed and go forward if the vehicle coming in the opposite direction fails to turn off the high beam light. This is designed to prevent an accident from happening when there are pedestrians crossing the place where the lights of the two vehicles meet.

A. Right

B. Wrong

Answer: A

24. When passing a section of a mountain road which is prone to landside and mudflow, the driver should not stop.

A. Right

B. Wrong

Answer: A

25. What is the max speed when in or out of the lane for non-motorized vehicles?

A. 40km/hr

B. 50km/hr

C. 60km/hr

D. 30km/hr

Answer: D