塔城驾照英文对照

1. Which part does it control when pulling this switch?

A. turn signals

B. reverse light

C. contour light

D. hazard light

Answer: A

2. It lights when turning on the front high beam lights.

A. Right

B. Wrong

Answer: B

3. How to drive through the intersection without traffic lights?

A. reduce speed and go slowly

B. speed up and pass

C. let large vehicle go first

D. let the left vehicle go first

Answer: A

4. A motorized vehicle driver who violates of traffic lights is subject to a 6-point penalty.

A. Right

B. Wrong

Answer: A

5. When following a vehicle, the following vehicle may use the high beam light.

A. Right

B. Wrong

Answer: B

6. Whats the meaning of this sign?

A. tunnel entry

B. observatory

C. mind side wind

D. wind vane

Answer: C

7. Whats the meaning of this guide arrow?

A. going straight or U turn

B. going straight or left turn

C. going straight or changing to left lane

D. left turn or U turn

Answer: B

8. Must reduce the frequency of honking in this section.

A. Right

B. Wrong

Answer: B

9. Whats the meaning of this sign?

A. reducing speed 40m ahead

B. minimum speed is 40km/hr

C. axle weight limit is 40 tons

D. maximum speed limit is 40km/hr

Answer: D

10. If a motorized vehicle causes a traffic accident on the road, the driver should immediately move the vehicle to the roadside.

A. Right

B. Wrong

Answer: B

11. The braking system may malfunction if it lights.

A. Right

B. Wrong

Answer: A

12. The contents of subject 2 test for small motor vehicle include Reversing stall parking, stopping at the appointed position and setting off on a slope, pulling over, driving by S-shaped line, sharp turning.

A. Right

B. Wrong

Answer: A

13. Whats the meaning of this sign?

A. hump bridge

B. high outburst road

C. low-lying road

D. bump road

Answer: A

14. In this case, if it has not begun going up the slope, the vehicle going uphill should yield to the one going downhill.

A. Right

B. Wrong

Answer: A

15. Whats the meaning of this sign?

A. no yielding

B. yield while crossing each other

C. reduce speed and yield

D. stop to yield

Answer: C

16. If a motorized vehicle hits a building or a public facility, the vehicle may leave the scene right away.

A. Right

B. Wrong

Answer: B

17. How to run in this situation?

A. stop and yield to the opposite car

B. turn on the left-turn signal and run on the left side

C. turn on the head lights to let the other side yield

D. speed up to bypass the obstacle and then cross the other vehicle

Answer: A

18. When reserving on an ordinary road and discovering some vehicles are passing, the driver should _________.

A. Honk to indicate the intention

B. Voluntarily stop and yield

C. Speed up and reverse

D. Continue to reverse

Answer: B

19. When a motorized vehicle stops temporarily at the roadside, the driver ________.

A. Is not allowed to stop in the opposite direction or in parallel

B. May stop anyway he likes as long as it is convenient for him to get out

C. May stop the vehicle in the opposite direction

D. May stop the vehicle in parallel

Answer: A

20. What marking is the white semicircle in the circle?

A. driving at reduced speed

B. ascertaining the vehicles speed

C. reducing the speed at the intersection

D. ascertaining the distance between the vehicles

Answer: D

21. In which situation the traffic police may detain the vehicle?

A. no vehicle registration papers

B. no insurance contract

C. no lable of environmental protection

D. no label of insurance

Answer: D

22. Which is correct in this kind of intersection?

A. make a U turn along the left lane

B. cannot make a U turn

C. make a U turn through the middle lane

D. make a U turn inside the intersection

Answer: B

23. When a vehicle passes a tunnel, it is prohibited from overtaking.

A. Right

B. Wrong

Answer: A

24. A motorized vehicle driver who uses falsified or altered driving license is subject to a 12-point penalty.

A. Right

B. Wrong

Answer: A

25. Continuously using the foot brake on a long downhill road ________.

A. Can shorten the engines service life

B. Increases the drivers labor intensity

C. Can drastically reduce the braking efficiency due to the rising temperature of the brake

D. Can easily cause vehicle overturn

Answer: C