白山英文考驾照用语

1. What is the max speed when down slope, turning around and U turn?

A. 50km/hr

B. 60km/hr

C. 30km/hr

D. 40km/hr

Answer: C

2. What is this manipulation device?

A. switch of windscreen wiper

B. switch of the head lights

C. switch of the turn signal

D. switch of defogger

Answer: A

3. Whats the meaning of this sign?

A. indication of the place name of the expressway ending

B. indication of the driving route of the expressway

C. indication of the driving direction of the expressway

D. indication of the location and distance of the expressway

Answer: D

4. When driving at night, the driver should go at a lower speed because his field of vision is limited and he can hardly observe the traffic conditions beyond the area covered by his vehicle light.

A. Right

B. Wrong

Answer: A

5. When a motorized vehicle breaks down on the expressway, the driver should place a warning sign 50 meters ~ 100 meters in the coming direction.

A. Right

B. Wrong

Answer: B

6. What marking is the triagle filled area in the circle?

A. stop line

B. deceleration line

C. guide line

D. cross-hatched marking

Answer: C

7. No U turn at this section.

A. Right

B. Wrong

Answer: B

8. Traffic markings are divided into indication, warning and prohibition.

A. Right

B. Wrong

Answer: A

9. What is the max speed on the expressway when the visibility is lower than 100 meters?

A. less than 40km/hr

B. less than 60km/hr

C. less than 80km/hr

D. less than 90km/hr

Answer: A

10. Whats the meaning of the yellow solid line on the curbstone?

A. only for taking and dropping people

B. only for loading and unloading cargos

C. no long stopping

D. no parking

Answer: D

11. Whats the meaning of the marking in the red circle?

A. temporary stopping

B. large bus stopping

C. bus station

D. emergency stopping

Answer: C

12. When a vehicle passes a bumped road, the driver should ________.

A. Speed up and dash over under inertia

B. Change to the neutral gear and slide over

C. Maintain the original speed and pass

D. Pass slowly and steadily

Answer: D

13. Whats the meaning of this sign?

A. Passing on both sides

B. Passing by the right side

C. Passing by the left side

D. Passing is prohibited

Answer: B

14. How to do when the vehicle breaks down on road and needs to stop to solve the problem?

A. stop in the middle of the road

B. stop the vehicle where will not interfere the traffic

C. turn on the low beam lights or fog lights

D. stop on the spot to solve the problem

Answer: B

15. You can overtake from both sides in this case.

A. Right

B. Wrong

Answer: B

16. A vehicle running on an expressway may frequently change lanes.

A. Right

B. Wrong

Answer: B

17. Which part does it control when rotating this part of the switch?

A. the low beam lights

B. the head and tail fog lights

C. high beam lights

D. turn signals

Answer: B

18. Whats the meaning of the diamond broken lines on the road?

A. road construction marking

B. vertical deceleration marking

C. horizontal deceleration marking

D. fewer lanes indication marking

Answer: B

19. Whats the meaning of the white horizontal solid line in the circle?

A. turning waiting line

B. deceleration line

C. yielding line

D. stop line

Answer: D

20. It lights when turning on the front high beam lights.

A. Right

B. Wrong

Answer: B

21. When entering an expressway toll gate, the driver should select a gate where _______.

A. There are more vehicles

B. The red light is on

C. The green light is on

D. Service is temporarily suspended

Answer: C

22. When finding a vehicle in the opposite direction having difficulty to go forward and needing to borrow road while crossing each other, the driver should ________.

A. Not occupy the road of the other side and should go forward normally

B. Indicate the other side to stop and yield

C. Speed up and go forward by the right side

D. Yield to the other side as much as possible

Answer: D

23. Whats the meaning of this sign?

A. lane direction indication

B. intersection ahead

C. lane information indication

D. road branching point ahead

Answer: B

24. Driving a motorized vehicle shall not overtake in tunnels, steep slopes and other special sections.

A. Right

B. Wrong

Answer: A

25. What marking is the combination of the white broken lines and the triangle area?

A. road entry marking

B. lane-dividing line that can be crossed

C. deceleration line at road entry

D. road exit marking

Answer: A