七台河英文驾考题目和考试题库

1. When a vehicle enters a two-way tunnel, the driver should turn on ________.

A. The hazard lights

B. The high beam light

C. The fog light

D. The width light or the low beam light

Answer: D

2. The driver is prohibited from opening the door and letting passengers on and off when a vehicle has not come to a full stop.

A. Right

B. Wrong

Answer: A

3. What should the driver do when encountering a vehicle from the opposite direction on a road without a central line?

A. driving closely by the roadside

B. driving by the central of the road

C. reducing speed and driving by right side

D. run by using the lane for non-motorized vehicles

Answer: C

4. Which kind of vehicles are allowed to run in the lane with this marking on road?

A. public transport vehicles

B. private vehicles

C. taxis

D. official vehicles

Answer: A

5. In this case, if it has not begun going up the slope, the vehicle going uphill should yield to the one going downhill.

A. Right

B. Wrong

Answer: A

6. This sign warns two neighboring inverse curves ahead.

A. Right

B. Wrong

Answer: B

7. Whats the meaning of the diamond broken lines on the road?

A. road construction marking

B. vertical deceleration marking

C. horizontal deceleration marking

D. fewer lanes indication marking

Answer: B

8. Whats the meaning of this guide arrow?

A. no passing

B. driving lane

C. merging

D. going straight

Answer: D

9. This set of the hand signals of the traffic police indicates that the vehicles should ____ .

A. wait to turn left

B. pull over

C. turn left

D. turn right

Answer: C

10. When a driver drives a motorized vehicle during the period of probation, the driver should paste or hang a uniform probation mark on the rear part of the vehicle.

A. Right

B. Wrong

Answer: A

11. What marking is the combination of the white broken lines and the triangle area?

A. road entry marking

B. lane-dividing line that can be crossed

C. deceleration line at road exit

D. road exit marking

Answer: D

12. What device does the switch of this symbol control?

A. the windscreen wiper and washer

B. the rear window defrosting or defogging

C. the rear window wiper and washer

D. the windscreen defrosting or defogging

Answer: C

13. How to cross each other on a narrow mountain road without the central dividing line?

A. The vehicle not close to the mountain goes first

B. The vehicle close to the mountain goes first

C. The empty vehicle goes first

D. The slow-moving vehicle goes first

Answer: A

14. Displays the current speed is 20 km / h

A. Right

B. Wrong

Answer: B

15. This sign reminds the road in front changes to inseparate two ways section.

A. Right

B. Wrong

Answer: A

16. Whats the meaning of the white markings on the road?

A. road construction marking

B. horizontal deceleration marking

C. vertical deceleration marking

D. fewer lanes indication marking

Answer: B

17. The three principles for careful driving are concentration, careful observation and early prevention.

A. Right

B. Wrong

Answer: A

18. What is the max speed limit on this road?

A. 100 km/hr

B. 90 km/hr

C. 120 km/hr

D. 110 km/hr

Answer: B

19. Whats the meaning of this sign?

A. watch for pedestrians

B. watch for children

C. school area

D. crosswalk

Answer: A

20. Driving a small passenger vehicle on the expressway, the minimum speed should not be less than 90 kilometers per hour.

A. Right

B. Wrong

Answer: B

21. Whats the meaning of this sign?

A. going straight and left turn

B. going straight and right turn

C. no going straight and no right turn

D. left turn and right turn only

Answer: B

22. What device does the switch of this symbol control?

A. window glasses of both sides

B. electric door

C. door unlock

D. child safety lock

Answer: C

23. When a vehicle passes a bumped road, the driver should ________.

A. Speed up and dash over under inertia

B. Change to the neutral gear and slide over

C. Maintain the original speed and pass

D. Pass slowly and steadily

Answer: D

24. What marking is the triagle filled area in the circle?

A. stop line

B. deceleration line

C. guide line

D. cross-hatched marking

Answer: C

25. What is the main role of the seat belt when there is a collision?

A. to protect the driver and passengers necks

B. to protect the driver and passengers chests

C. to reduce the injuries of the driver and passengers

D. to protect the driver and passengers waists

Answer: C