安庆驾考英文版下载

1. It lights to indicate that ______

A. not buckled up

B. safety belt malfunction

C. the safety belts are too loose

D. buckled up already

Answer: A

2. What marking is the road mark in the circle?

A. crosswalk line

B. slowdown and yield line

C. stopping and yield line

D. intersection signal line

Answer: A

3. What causes the rear-end collision?

A. not observe through the rear-view mirror while the vehicle in front brakes

B. the vehicle in front brakes suddenly

C. distance from the vehicle in front is too close when the rear vehicle overtakes

D. not maintain a safe distance from the vehicle in front

Answer: D

4. This sign means a Y-shaped intersection ahead.

A. Right

B. Wrong

Answer: B

5. This sign indicates construction section ahead and bypassing from left or right side.

A. Right

B. Wrong

Answer: B

6. You have the priviledged passing right of way at the intersection in this situation.

A. Right

B. Wrong

Answer: B

7. How to use light in this situation at the intersection?

A. turn off high beam lights

B. use hazard lights

C. use the high and low beam lights alternately

D. use high beam lights

Answer: C

8. Opening the doors of a motorized vehicle should not obstruct the flow of other vehicles and pedestrians.

A. Right

B. Wrong

Answer: A

9. When driving in icy and snowy weather, ________.

A. The braking distance becomes longer

B. The resistance to slide becomes larger

C. The braking performance does not change

D. The road grip becomes stronger

Answer: A

10. What does this sign mean?

A. Reminding continuous two or more up slopes ahead

B. Reminding the steep uphill road ahead

C. Reminding the steep downhill road ahead

D. Reminding continuous two or more down slopes ahead

Answer: D

11. When a motorized vehicle crosses a non-motorized vehicle on a narrow road or a narrow bridge at night, the motorized vehicle should use the high beam light.

A. Right

B. Wrong

Answer: B

12. When starting up a vehicle stopping at the roadside, the driver should first ________.

A. Depress the accelerator pedal and start

B. Honk

C. Increase engine rotation speed

D. Observe the conditions around the vehicles

Answer: D

13. You should speed up through the section with this kind of traffic marking.

A. Right

B. Wrong

Answer: B

14. Whats the meaning of this guide arrow?

A. changing to left lane

B. going straight ahead

C. left turn ahead

D. right turn ahead

Answer: C

15. If the drivers accumulated penalty points reach the stipulated limit, he will be _______ by the traffic control department of the public security organ.

A. detained for less than 15 days

B. banned for lifetime from driving

C. educated on the law and regulations and take the exam again

D. held for criminal liabilities according to law

Answer: C

16. When driving a motorized vehicle uphill, you should speed up and honk when you going to reach the top of the slope.

A. Right

B. Wrong

Answer: B

17. What is the max speed on the expressway when the visibility is lower than 100 meters?

A. less than 40km/hr

B. less than 60km/hr

C. less than 80km/hr

D. less than 90km/hr

Answer: A

18. A small bus driver should reduce speed rapidly when he suddenly feel bumpy on a flat expressway, to prevent tire blowout.

A. Right

B. Wrong

Answer: A

19. This sign reminds the lane or the road narrows on the right side ahead.

A. Right

B. Wrong

Answer: A

20. It lights when turning on the width light.

A. Right

B. Wrong

Answer: A

21. Whats the meaning of this sign?

A. no left turn

B. leftt and right turn

C. no leftt and right turn

D. no right turn

Answer: B

22. In which situation the traffic police may detain the vehicle on road?

A. not hang the license plate

B. no ID card

C. no insurance contract

D. no lable of environmental protection

Answer: A

23. When discovering a vehicle behind wanting to overtake while driving, the driver should _______.

A. Maintain the original speed

B. Reduce speed, observe and run by the right side to yield

C. Speed up and go ahead by the right side

D. Not yield

Answer: B

24. What is the main role of the seat belt when there is a collision?

A. to protect the driver and passengers necks

B. to protect the driver and passengers chests

C. to reduce the injuries of the driver and passengers

D. to protect the driver and passengers waists

Answer: C

25. Using the high and low beam lights alternately while driving on the road of this kind of sharp curve.

A. Right

B. Wrong

Answer: A