茂名驾校考试 英文

1. What marking is the combination of the white broken lines and the triangle area?

A. road entry marking

B. lane-dividing line that can be crossed

C. deceleration line at road entry

D. road exit marking

Answer: A

2. When crossing each other at night, how far should change the high beam lights to low beam lights?

A. not need to change lights

B. beyond 150m

C. within 100m

D. within 50m

Answer: B

3. You can drive directly into the expressway from this position.

A. Right

B. Wrong

Answer: B

4. It flashes when turning on the hazard lights.

A. Right

B. Wrong

Answer: A

5. Whats the meaning of this sign?

A. no U turn at intersection

B. no changing lane from both sides

C. no left or right turn

D. no going straight

Answer: C

6. When bicycles ahead obstruct the traffic flow, the driver may honk to remind them,speed up and bypass.

A. Right

B. Wrong

Answer: B

7. How to use light in this situation at the intersection?

A. turn off high beam lights

B. use hazard lights

C. use the high and low beam lights alternately

D. use high beam lights

Answer: C

8. Traffic Police can detain the vehicle according to law if it runs on the road failing to place a label of inspection.

A. Right

B. Wrong

Answer: A

9. Whats the meaning of this sign?

A. expressway mileage No.

B. expressway border plate No.

C. expressway name No.

D. expressway section No.

Answer: C

10. A motorized vehicle driver who has not yielded to the school bus according to stipulations is subject to a 6-point penalty.

A. Right

B. Wrong

Answer: A

11. When encountering slow-moving vehicles at an intersection that has no traffic signals, the motorized vehicle should pass alternately.

A. Right

B. Wrong

Answer: A

12. When a vehicle encounters a bike rider coming in the opposite direction on the road, the driver should _________.

A. Continuously change the high and low bean lights

B. Continuously honk

C. Use the low beam light, reduce speed or stop to evade

D. Use the high beam light

Answer: C

13. When passing an unmanned level crossing, the driver should ________.

A. Speed up and pass

B. Reduce speed and pass

C. Maintain the speed and pass

D. Stop, look and pass

Answer: D

14. A vehicle should try to speed up after starting from the roadside and rapidly turn left into the traffic flow on the road.

A. Right

B. Wrong

Answer: B

15. When a vehicle has to stop on an expressway due to a vehicle trouble, the driver should place a breakdown warning sign beyond ______ m behind the vehicle.

A. 25

B. 150

C. 100

D. 50

Answer: B

16. What pedal is it?

A. clutch pedal

B. accelerator pedal

C. brake pedal

D. handbrake

Answer: C

17. In the course of reversing, the driver should move slowly, observe the conditions on both sides and in the rear and be ready to stop anytime.

A. Right

B. Wrong

Answer: A

18. How to go straight when encountering this traffic light at the intersection?

A. enter the intersection to wait

B. turn left

C. speed up and pass straight

D. can not exceed the stop line

Answer: D

19. The rear windshield defroster starts to work after pressing this switch.

A. Right

B. Wrong

Answer: B

20. How to drive in sand, hail, rain, fog, ice and other weather conditions?

A. run as normal

B. maintain the speed

C. speed up properly

D. reduce the speed

Answer: D

21. If a motorized vehicle driver drives on the road after getting drunk is subject to a prison term of more than 3 years.

A. Right

B. Wrong

Answer: B

22. After a vehicle enters the ramp, the driver should swiftly increase the speed to more than 60 kilometers per hour.

A. Right

B. Wrong

Answer: B

23. Nobody is allowed to drive a motorized vehicle that has safety hazards.

A. Right

B. Wrong

Answer: A

24. Which is correct if a vehicle breaks down and is difficult to move?

A. turn on the hazard lights

B. turn on all the lights of the vehicle

C. forbid the passengers to get off

D. place a warning sign in front of the vehicle

Answer: A

25. This sign reminds an unmanned level crossing ahead.

A. Right

B. Wrong

Answer: B