济南考驾驶证英语题库

1. It lights to indicate that ______

A. the head and tail fog lights are turned on

B. front and rear width lights are turned on

C. the head lights are turned on

D. the hazard lights are turned on

Answer: B

2. Whats the meaning of this sign?

A. stop to yield

B. no stopping temporarily

C. no entry

D. no long stopping

Answer: A

3. This set of the hand signals of the traffic police indicates that the vehicles should ___ .

A. wait to turn left

B. pull over

C. turn right

D. reduce speed and pass slowly

Answer: C

4. Can not overtake in this situation.

A. Right

B. Wrong

Answer: A

5. When driving at night, the driver should try as much as possible to avoid overtaking. When he really needs to overtake, he may switch the high and low beam lights to alert the vehicle in front.

A. Right

B. Wrong

Answer: A

6. When driving in icy and snowy weather, ________.

A. The braking distance becomes longer

B. The resistance to slide becomes larger

C. The braking performance does not change

D. The road grip becomes stronger

Answer: A

7. Which kind of vehicle can be initially applied for when one reaches 20 years old?

A. large truck

B. large bus

C. midsize bus

D. trailer

Answer: A

8. A motorized vehicle driver who escapes after causing a traffic accident but his conduct does not constitute a crime, is subject to a ________.

A. 3-point penalty

B. 2-point penalty

C. 12-point penalty

D. 6-point penalty

Answer: C

9. Whats the meaning of this sign?

A. intersection

B. ring intersection

C. T-shaped intersection

D. Y-shaped intersection

Answer: A

10. When an accident has caused congestion on an expressway, the vehicles may run in the emergency strip on the right or in the shoulder of the road.

A. Right

B. Wrong

Answer: B

11. After entering the acceleration lane of an expressway, the driver should increase the speed to more than _________ per hour.

A. 50

B. 60

C. 30

D. 40

Answer: B

12. The contents of subject 2 test for small motor vehicle include Reversing stall parking, stopping at the appointed position and setting off on a slope, pulling over, driving by S-shaped line, sharp turning.

A. Right

B. Wrong

Answer: A

13. When reaching an intersection, a left-turning vehicle may enter the left-turn waiting area anytime.

A. Right

B. Wrong

Answer: B

14. If the driver finds there is no vehicle following, he can change lanes without turning on the turn signal.

A. Right

B. Wrong

Answer: B

15. What is this instrument?

A. water temperature meter

B. fuel meter

C. ammeter

D. pressure meter

Answer: A

16. When a vehicle goes uphill, the driver should observe the road conditions and the length of the slope in advance and shift to the lower gear in a timely manner to ensure the vehicle has sufficient power.

A. Right

B. Wrong

Answer: A

17. Turn on the right-turn signal and return immediately to the original lane afterovertaking.

A. Right

B. Wrong

Answer: B

18. What does this sign mean?

A. Reminding continuous two or more up slopes ahead

B. Reminding the steep uphill road ahead

C. Reminding the steep downhill road ahead

D. Reminding continuous two or more down slopes ahead

Answer: D

19. What marking is it?

A. A cross-hatched marking

B. prohibitive area

C. guide line

D. central circle

Answer: D

20. The oil pressure of engine may be too high if it lights.

A. Right

B. Wrong

Answer: B

21. What kind of violation does the red car have while temporarily stopping here?

A. more than 30cm from roadside

B. stop in the section with no stopping marking

C. less than 30m from gas station

D. stop occupying the lane for non-motorized vehicles

Answer: C

22. Reducing the speed to yield when encountering this situation in the intersection.

A. Right

B. Wrong

Answer: A

23. May not drive if _____

A. the window is not closed

B. the door is not closed

C. the audio device is not closed

D. the roof window is not closed

Answer: B

24. What is this manipulation device?

A. switch of reverse light

B. switch of wiper

C. switch of the hazard lights

D. combination switch of lights and signals

Answer: D

25. What is the main role of the seat belt when there is a collision?

A. to protect the driver and passengers necks

B. to protect the driver and passengers chests

C. to reduce the injuries of the driver and passengers

D. to protect the driver and passengers waists

Answer: C