喀什驾校考试 英文

1. Use the high and low beam lights alternately when passing the crosswalk at night.

A. Right

B. Wrong

Answer: A

2. When encountering stopping and waiting in turn or slow-moving vehicles in front, the motorized vehicle may _________.

A. borrow road to overtake

B. occupy the opposite lane

C. follow the vehicles in front

D. cut in the waiting vehicles

Answer: C

3. If the registration paper, license plate and vehicle license of a motorized vehicle are lost or destroyed, the vehicle owner should apply for reissuing or replacing them to the vehicle management station at the residential place.

A. Right

B. Wrong

Answer: B

4. When a tire blows out suddenly on the road, the driver should refrain from violently depressing the brake pedal in panic. Instead, he should try his best to shift the gear to a low position and use the engine braking to reduce the speed of the vehicle.

A. Right

B. Wrong

Answer: A

5. Whats the meaning of the double white solid lines in far front of the intersection?

A. stopping and yield line

B. slowdown and yield line

C. left-turn waiting line

D. waiting to run line

Answer: A

6. Whats the meaning of the marking in the red circle?

A. temporary stopping

B. bay-stopping

C. emergency stopping

D. public bus station

Answer: B

7. When encountering a traffic jam on the expressway, the driver should follow the front vehicle lining up, and immediately turn on the hazard light to prevent rear-end collision.

A. Right

B. Wrong

Answer: A

8. Whats the meaning of the diamond broken lines on the road?

A. road construction marking

B. vertical deceleration marking

C. horizontal deceleration marking

D. fewer lanes indication marking

Answer: B

9. When a vehicle changes lane, the driver should turn on the turn signal in advance,observe traffic conditions, maintain a safe distance and move into the new lane.

A. Right

B. Wrong

Answer: A

10. Driving a motorized vehicle on the road in this condition, the maximum speed can not exceed 50 kilometers per hour.

A. Right

B. Wrong

Answer: B

11. The safety pillow is used to protect the driver‘s head when there is a rear-end collision.

A. Right

B. Wrong

Answer: B

12. A vehicle should try to speed up after starting from the roadside and rapidly turn left into the traffic flow on the road.

A. Right

B. Wrong

Answer: B

13. It lights to indicate that the handbrake may not loose in the end.

A. Right

B. Wrong

Answer: B

14. How far should be the distance from the vehicle in front at the speed of more than 100 km/hr when driving a small passenger vehicle on the expressway?

A. more than 50 meters

B. more than 60 meters

C. more than 100 meters

D. more than 80 meters

Answer: C

15. When a vehicle runs on an expressway, the driver may ascertain the speed according to his feeling.

A. Right

B. Wrong

Answer: B

16. It lights to indicate that ______

A. the head and tail fog lights are turned on

B. front and rear width lights are turned on

C. the head lights are turned on

D. the hazard lights are turned on

Answer: B

17. How far away should the warning sign be placed in the coming direction when this vehicle breaks down and stops temporarily on the expressway?

A. beyond 150m

B. 50~150m

C. within 50m

D. 50~100m

Answer: A

18. What marking is the road mark?

A. crosswalk ahead

B. intersection ahead

C. reduce speed and yield ahead

D. stop to yield ahead

Answer: A

19. In the course of reversing, the driver should move slowly, observe the conditions on both sides and in the rear and be ready to stop anytime.

A. Right

B. Wrong

Answer: A

20. Whats the meaning of this guide arrow?

A. change to left lane

B. going straight ahead

C. U turn ahead

D. right turn ahead

Answer: C

21. This set of the hand signals of the traffic police indicates that the vehicles should ___ .

A. turn right

B. pull over

C. turn left

D. stop

Answer: D

22. When driving slowly in a congested road, the driver should ________ if another vehicle forcefully cuts in.

A. Honk to warn it against cutting in

B. Speed up to closely follow the vehicle in front and refuse to allow it to cut in

C. Squeeze the cutting-in vehicle to force it to leave

D. Voluntarily yield to ensure safe driving

Answer: D

23. What marking is it?

A. A cross-hatched marking

B. prohibitive area

C. guide line

D. central circle

Answer: D

24. What marking is the yellow road surface in the center of the intersection?

A. central circle

B. guide line

C. cross-hatched marking

D. parking area

Answer: C

25. When a vehicle wades across the water, the driver should maintain a low speed, and _____ the brake pedal so as to restore the braking efficiency.

A. Continuously and strongly depress

B. Intermittently and strongly depress

C. Continuously and gently depress

D. Intermittently and gently depress

Answer: D