舟山驾考英文版手机版

1. The wrong measure to avoid tire blowout is to _________.

A. Reduce tire pressure

B. Check the tires regularly

C. Remove objects from tire tread grooves in a timely manner

D. Replace the tire that has cracks or deep cuts

Answer: A

2. When a vehicle merges with the traffic flow, the driver should turn on the turn signal in advance, go straight, observe the traffic conditions on both sides through the rear-view mirror, and merge with the traffic flow if it is safe to do so.

A. Right

B. Wrong

Answer: A

3. If a motorized vehicle runs 50% faster than the specified speed limit, the driver is subject to a 3-point penalty.

A. Right

B. Wrong

Answer: B

4. Move the switch up and down, the windscreen wipers start working.

A. Right

B. Wrong

Answer: A

5. Whats the meaning of this guide arrow?

A. no passing

B. driving lane

C. merging

D. going straight

Answer: D

6. Traffic lights are divided into red, green and yellow light.

A. Right

B. Wrong

Answer: A

7. When driving in thick or extremely thick fog, the driver should ____ due to low visibility.

A. Turn on the head light and keep driving

B. Turn on the contour light, fog light and drive along the right side

C. Turn on the hazard lights and keep driving

D. Turn on the hazard lights, fog light, and stop at a safe place

Answer: D

8. Driving and smoking has no harm on safe driving.

A. Right

B. Wrong

Answer: B

9. For a driver who drives a commercial motor vehicle after drinking, besides revoking his/her driving license, how long will he/she be banned from re-obtaining a motor vehicle driving license?

A. 1 year

B. 2 year

C. 5 year

D. 10 year

Answer: C

10. At this position, you may speed up to pass through the section.

A. Right

B. Wrong

Answer: B

11. It lights when turning on the rear fog light.

A. Right

B. Wrong

Answer: B

12. Which is correct to use lights on rainy day when following a vehicle?

A. use high beam lights

B. cannot use the low beam lights

C. cannot use the high beam light

D. use fog lights

Answer: C

13. Whats the meaning of this sign?

A. stop to yield

B. one-way road

C. going first when crossing each other

D. the opposite vehicle goes first when crossing each other

Answer: C

14. Whats the meaning of this sign?

A. embankment road

B. cliffside road

C. waterside road

D. slippery road

Answer: A

15. When driving at night, the driver should reduce speed and go forward if the vehicle coming in the opposite direction fails to turn off the high beam light. This is designed to prevent an accident from happening when there are pedestrians crossing the place where the lights of the two vehicles meet.

A. Right

B. Wrong

Answer: A

16. Whats the meaning of this sign?

A. section narrows on both sides

B. section for speed test

C. section for ascertaining the distance between the vehicles

D. pay attentions to keeping distance

Answer: D

17. Traffic Police can detain the vehicle according to law if the driver does not carry the IDcard.

A. Right

B. Wrong

Answer: B

18. What marking is the yellow road surface in the center of the intersection?

A. central circle

B. guide line

C. cross-hatched marking

D. parking area

Answer: C

19. What is the max speed on this city road?

A. 40km/hr

B. 30km/hr

C. 50km/hr

D. 70km/hr

Answer: B

20. In a vehicle that has safety belts, the driver should request the passengers to buckle up.

A. Right

B. Wrong

Answer: A

21. Nobody is allowed to drive a motorized vehicle that has safety hazards.

A. Right

B. Wrong

Answer: A

22. When driving a vehicle through an inundated road with pedestrians on both sides, the driver should ________.

A. Speed up and pass

B. Go forward normally

C. Continuously honk

D. Reduce speed and go slowly

Answer: D

23. The vehicle is allowed to _______ at this intersection.

A. go straight or turn right

B. turn right

C. turn left

D. go straight

Answer: C

24. What marking is the combination of the white broken lines and the triangle area?

A. road entry marking

B. lane-dividing line that can be crossed

C. deceleration line at road entry

D. road exit marking

Answer: A

25. Whats the role of the indicative marking?

A. No passing

B. indicate vehicles to pass

C. restrict from passing

D. warn and remind

Answer: B