毕节考驾照用英语

1. Whats the role of directional sign?

A. restrict the vehicles from passing

B. indicate speed limited information

C. provide direction information

D. warn danger ahead

Answer: C

2. If the license plate of a motorized vehicle has been destroyed, the owner of the vehicle should apply for reissuing or changing to the vehicle management station at the registration place.

A. Right

B. Wrong

Answer: A

3. It lights to indicate that ______

A. the tail fog light is turned on

B. the low beam light is turned on

C. the high beam light is turned on

D. the head fog light is turned on

Answer: B

4. What is the max speed on the expressway when the visibility is lower than 100 meters?

A. less than 40km/hr

B. less than 60km/hr

C. less than 80km/hr

D. less than 90km/hr

Answer: A

5. When a motorized vehicle encounters the cut in by another vehicle in a roundabout, the driver may not evade as long as he has the right of way.

A. Right

B. Wrong

Answer: B

6. It lights when the handbrake is pulled up.

A. Right

B. Wrong

Answer: A

7. Whats the meaning of this figure mark on the road?

A. a mark of keeping distance

B. a mark of minimum distance

C. a mark of speed limit

D. a mark of road number

Answer: C

8. Whats the meaning of this sign?

A. provincial highway No.

B. national highway No.

C. county road No.

D. township road No.

Answer: C

9. Whats the meaning of the yellow broken and solid lines in the middle of the road?

A. no crossing the lines on the side of the broken line

B. no crossing the lines on the side of the solid line

C. allowed to cross the lines on the side of the solid line

D. allowed to cross the lines on both sides

Answer: B

10. How long is the period of probation after a motorized vehicle driver obtains his driving license for the first time or the permission to drive higher level vehicles.

A. 6 months

B. 12 months

C. 2 years

D. 3 months

Answer: B

11. Is there any effective auxiliary method to control the speed while driving on a long downhill road besides braking.

A. Shift to the neutral gear and slide

B. Use the engine to brake

C. Turn off the engine and slide

D. Depress the clutch and slide

Answer: B

12. Whats the meaning of this sign?

A. continuous down slopes

B. steep downhill road

C. steep uphill road

D. continuous up slopes

Answer: A

13. What is this manipulation device?

A. switch of windscreen wiper

B. switch of the head lights

C. switch of the turn signal

D. switch of defogger

Answer: A

14. What is the max speed limit on this road?

A. 100 km/hr

B. 90 km/hr

C. 120 km/hr

D. 110 km/hr

Answer: B

15. Speed up when passing the overflowing road.

A. Right

B. Wrong

Answer: B

16. Whats the meaning of this sign?

A. embankment road

B. dangerous hillside road

C. rock-falling road

D. cliffside road

Answer: B

17. When following a vehicle on the road, the distance from the vehicle in front is not important. As long as the driver goes forward at the same speed as the vehicle in front does, he can avoid rear-end collision.

A. Right

B. Wrong

Answer: B

18. When driving in icy and snowy weather, the vehicle steadiness decreases and sudden acceleration can very easily cause spins and slides.

A. Right

B. Wrong

Answer: A

19. It lights to indicate that ______

A. the head and tail fog lights are turned on

B. front and rear width lights are turned on

C. the head lights are turned on

D. the hazard lights are turned on

Answer: B

20. Cannot make a U turn in this section.

A. Right

B. Wrong

Answer: A

21. How to pass this intersection?

A. not reduce speed to pass

B. speed up to pass as soon as possible

C. slide over in the neutral gear

D. reduce speed or stop to observe

Answer: D

22. What device does the switch of this symbol control?

A. the windscreen defrosting or defogging

B. the rear window wiper and washer

C. the windscreen wiper and washer

D. the rear window defrosting or defogging

Answer: C

23. This sign reminds embankment road ahead.

A. Right

B. Wrong

Answer: B

24. When a vehicle on the main road approaches a conjunction with a feeder road, the driver should ______ in order to prevent a collision with a vehicle that suddenly enters from the feeder road.

A. Maintain the normal speed

B. Reduce speed in advance, observe and drive with care

C. Honk and swiftly pass

D. Speed up in advance and pass

Answer: B

25. Stop and yield to the pedestrians under this situation.

A. Right

B. Wrong

Answer: A