延安驾考科目一英文版

1. The double yellow solid lines in the middle of the road are used to separate the traffic flow in opposite directions, crossing the lines to overtake or make a turn is allowed if it is safe.

A. Right

B. Wrong

Answer: B

2. Whats the meaning of this sign?

A. township road No.

B. county road No.

C. provincial highway No.

D. national highway No.

Answer: D

3. How long can a driver drives without rest?

A. less than 6hrs

B. less than 8hrs

C. less than 10hrs

D. less than 4hrs

Answer: D

4. When the light switch is rotated to the position, the whole car lights turn on.

A. Right

B. Wrong

Answer: B

5. How to use light in this situation at the intersection?

A. turn off high beam lights

B. use hazard lights

C. use the high and low beam lights alternately

D. use high beam lights

Answer: C

6. When reserving on an ordinary road and discovering some vehicles are passing, the driver should _________.

A. Honk to indicate the intention

B. Voluntarily stop and yield

C. Speed up and reverse

D. Continue to reverse

Answer: B

7. How to do in this intersection?

A. wait in the cross-hatched marking area

B. stop and wait outside the intersection

C. follow the vehicle in front and pass

D. wait inside the intersection

Answer: B

8. Whats the meaning of this sign?

A. dangerous hillside road

B. cliff section

C. watch for dropping stone

D. dangerous section

Answer: C

9. Whats the meaning of this sign?

A. 3m width limit ahead

B. 3m width limit

C. the 3m width limit ban is lifted

D. 3m height limit

Answer: B

10. How to use lights at night while crossing each other on narrow road or bridge?

A. turn off all the lights

B. turn on the low beam lights

C. turn off the head lights

D. turn on high beam lights

Answer: B

11. May speed up to go through the crosswalk in this situation.

A. Right

B. Wrong

Answer: B

12. How far should be the distance from the vehicle in front at the speed of more than 100 km/hr when driving a small passenger vehicle on the expressway?

A. more than 50 meters

B. more than 60 meters

C. more than 100 meters

D. more than 80 meters

Answer: C

13. Whats the meaning of this sign?

A. stop to yield

B. one-way road

C. going first when crossing each other

D. the opposite vehicle goes first when crossing each other

Answer: C

14. When passing an unmanned level crossing, the driver should ________.

A. Speed up and pass

B. Reduce speed and pass

C. Maintain the speed and pass

D. Stop, look and pass

Answer: D

15. Whats the meaning of this sign?

A. no right turn

B. no U turn

C. no going straight

D. no left turn

Answer: C

16. Which kind of vehicles are allowed to run in the lane with this marking on road?

A. public transport vehicles

B. private vehicles

C. taxis

D. official vehicles

Answer: A

17. Do not hang or place articles close to the front and rear windows that block the vision of the driver.

A. Right

B. Wrong

Answer: A

18. This set of the hand signals of the traffic police indicates that the vehicles should ____ .

A. reduce speed and pass slowly

B. pull over

C. stop

D. turn right

Answer: D

19. It lights to indicate that ______

A. windscreen wash lacks

B. braking oil lacks

C. cooling system malfunction

D. coolant lacks

Answer: D

20. When causing a road accident involving property damage, the parties to the accident have no dispute over the fact and cause, they should take photos of the scene or mark the vehicles location when they move the vehicles.

A. Right

B. Wrong

Answer: A

21. Can not overtake in this situation.

A. Right

B. Wrong

Answer: A

22. The age should be 18 ~ 70 years old when applying for the driving license of small vehicle or three-wheeled automobile.

A. Right

B. Wrong

Answer: A

23. Whats the meaning of this sign?

A. no left turn

B. leftt and right turn

C. no leftt and right turn

D. no right turn

Answer: B

24. The vehicle is allowed to _______ at this intersection.

A. go straight or turn right

B. turn right

C. turn left

D. go straight

Answer: C

25. What mark is the inclined yellow and black lines?

A. entity mark

B. protrusions mark

C. three-dimensional mark

D. deceleration mark

Answer: C