濮阳驾校考试 英文

1. Whats the meaning of this sign?

A. no stopping temporarily

B. no long stopping

C. no stopping

D. long stopping is allowed

Answer: B

2. When a motorized vehicle breaks down on the expressway, the driver should place a warning sign 50 meters ~ 100 meters in the coming direction.

A. Right

B. Wrong

Answer: B

3. A vehicle is not allowed to reverse on the ramp of an expressway.

A. Right

B. Wrong

Answer: A

4. Whats the meaning of this sign?

A. Passing on both sides

B. Passing is prohibited

C. Passing by the left side

D. Passing by the right side

Answer: A

5. Whats the meaning of this sign?

A. no borrowing lane

B. no changing lane

C. no overtaking

D. no U turn

Answer: C

6. Whats the meaning of this sign?

A. water channel

B. bridge

C. tunnel

D. Culvert

Answer: C

7. When a vehicles turns, it should do so on the right side and refrain from occupying the lane of the other party. The left turn should be gentle and the right turn should be sharp.

A. Right

B. Wrong

Answer: A

8. A rear tire blowout can sway the tail of the vehicle. The driver should firmly hold the steering wheel with both hands to ensure the vehicle go straight, reduce speed and then stop.

A. Right

B. Wrong

Answer: A

9. If a motorized vehicle breaks down or causes a traffic accident on the expressway and cannot to run normally, the vehicle should be towed by ______.

A. a vehicle passing by

B. a large bus

C. a vehicle traveling together

D. a tow truck

Answer: D

10. When a driver drives a motorized vehicle during the period of probation, the driver should paste or hang a uniform probation mark on the rear part of the vehicle.

A. Right

B. Wrong

Answer: A

11. Whats the meaning of this sign?

A. rescue call number on expressway

B. service call number on expressway

C. police call number on expressway

D. traffic radio frequency on expressway

Answer: D

12. Reducing the speed to yield when encountering this situation in the intersection.

A. Right

B. Wrong

Answer: A

13. Whats the meaning of this sign?

A. the distance from the tunnel exit

B. the distance from the tunnel entry

C. the distance of following the vehicle in front in the tunnel

D. the whole length of the tunnel

Answer: A

14. Whats the meaning of this sign?

A. embankment road

B. steep uphill road

C. continuous up slopes

D. steep downhill road

Answer: D

15. Whats the meaning of this sign?

A. hump bridge

B. high outburst road

C. low-lying road

D. bump road

Answer: A

16. Pass the crossing as fast as possible if there is a red light at the intersection of a road or a level crossing.

A. Right

B. Wrong

Answer: B

17. Whats the meaning of the white solid line in the middle of the road?

A. unilateral same direction lanes dividing line that can be crossed

B. same direction lanes dividing line that can not be crossed

C. bilateral same direction lanes dividing line that can be crossed

D. opposite direction lanes dividing line that can not be crossed

Answer: B

18. Driving a motorized vehicle shall not overtake in tunnels, steep slopes and other special sections.

A. Right

B. Wrong

Answer: A

19. When the fire engine, ambulance and wrecker are executing an emergency task, other vehicles should yield.

A. Right

B. Wrong

Answer: A

20. Does not affect normal driving when it lights

A. Right

B. Wrong

Answer: B

21. It lights to indicate that ______

A. the tail fog light is turned on

B. the low beam light is turned on

C. the high beam light is turned on

D. the head fog light is turned on

Answer: A

22. How far should be the distance from the vehicle in front at the speed of more than 100 km/hr when driving a small passenger vehicle on the expressway?

A. more than 50 meters

B. more than 60 meters

C. more than 100 meters

D. more than 80 meters

Answer: C

23. Whats the meaning of this sign?

A. no changing lane

B. no left turn

C. no going straight

D. no U turn

Answer: D

24. Whats the meaning of this sign?

A. yield if going to turn left

B. straight one-way road

C. right one-way road

D. left one-way road

Answer: D

25. How to use lights when entering the speed-reducing lane?

A. turn on the hazard lights

B. turn on the head light

C. turn on the left-turn signal

D. turn on the right-turn signal

Answer: D