松原驾考英文版题库

1. After entering the acceleration lane of an expressway, the driver should increase the speed to more than _________ per hour.

A. 50

B. 60

C. 30

D. 40

Answer: B

2. What marking is it?

A. prohibitive area

B. cross-hatched marking

C. guide line

D. central circle

Answer: D

3. Whats the meaning of this sign?

A. expressway toll station

B. expressway checkpoint

C. toll station with ETC

D. expressway card-getting point

Answer: C

4. Can not overtake in this situation.

A. Right

B. Wrong

Answer: A

5. It lights to indicate that the handbrake may not loose in the end.

A. Right

B. Wrong

Answer: B

6. May turn right when encountering this traffic light at the intersection.

A. Right

B. Wrong

Answer: A

7. The yellow lane-dividing line in the picture is used to separate the traffic flow in opposite directions, crossing the line to overtake or make a turn is allowed if it is safe.

A. Right

B. Wrong

Answer: A

8. The doors of both sides are not closed if it lights.

A. Right

B. Wrong

Answer: A

9. Which part does it control when rotating this part of the switch?

A. the low beam lights

B. the head and tail fog lights

C. high beam lights

D. turn signals

Answer: B

10. The light switch is in this position, front fog lights turn on

A. Right

B. Wrong

Answer: A

11. When overtaking, the driver should try his best to increase the horizontal distance and,when necessary, may cross the solid line to overtake.

A. Right

B. Wrong

Answer: B

12. This sign reminds bump road ahead which may causes bump phenomenon.

A. Right

B. Wrong

Answer: A

13. Whats the meaning of the yellow broken and solid lines in the middle of the road?

A. no crossing the lines on the side of the broken line

B. no crossing the lines on the side of the solid line

C. allowed to cross the lines on the side of the solid line

D. allowed to cross the lines on both sides

Answer: B

14. Traffic Signs and traffic markings are not traffic signals.

A. Right

B. Wrong

Answer: B

15. What marking is the white solid lines in the circle?

A. guide lanes lines

B. variable guide lanes lines

C. direction guide lines

D. one-way driving lines

Answer: A

16. When driving in thick or extremely thick fog, the driver should ____ due to low visibility.

A. Turn on the head light and keep driving

B. Turn on the contour light, fog light and drive along the right side

C. Turn on the hazard lights and keep driving

D. Turn on the hazard lights, fog light, and stop at a safe place

Answer: D

17. What device does the switch of this symbol control?

A. window glasses of both sides

B. electric door

C. door unlock

D. child safety lock

Answer: C

18. When driving slowly in a congested road, the driver should ________ if another vehicle forcefully cuts in.

A. Honk to warn it against cutting in

B. Speed up to closely follow the vehicle in front and refuse to allow it to cut in

C. Squeeze the cutting-in vehicle to force it to leave

D. Voluntarily yield to ensure safe driving

Answer: D

19. What kind of marking are the double yellow solid lines in the middle of the road?

A. auxiliary marking

B. warning sign

C. prohibitive marking

D. indicative marking

Answer: C

20. What is the max speed when passing a level crossing?

A. 15km/hr

B. 20km/hr

C. 30km/hr

D. 40km/hr

Answer: C

21. Traffic lights are divided into red, green and yellow light.

A. Right

B. Wrong

Answer: A

22. If a motorized vehicle driver has caused a major accident in violation of the traffic regulations which has caused serious injury, the driver is subject to a prison term of less than 3 years or a criminal detention.

A. Right

B. Wrong

Answer: A

23. What kind of violation does the red car have while temporarily stopping here?

A. more than 30cm from roadside

B. stop in the section with no stopping marking

C. less than 30m from gas station

D. stop occupying the lane for non-motorized vehicles

Answer: C

24. If a motorized vehicle runs 50% faster than the specified speed limit, the driver is subject to a 3-point penalty.

A. Right

B. Wrong

Answer: B

25. When starting up a vehicle stopping at the roadside, the driver should first ________.

A. Depress the accelerator pedal and start

B. Honk

C. Increase engine rotation speed

D. Observe the conditions around the vehicles

Answer: D