怒江驾照考试英语

1. When a vehicle starts to move, the driver should first turn on the low beam light.

A. Right

B. Wrong

Answer: A

2. It lights to indicate that ______

A. the floor and the front fans work

B. air internal circulation

C. air external circulation

D. the side and the floor fans work

Answer: A

3. What kind of violation does this stopping car have?

A. stop occupying the lane for non-motorized vehicles

B. stop in the section with no stopping marking

C. stop at bus station

D. stop occupying sidewalk

Answer: C

4. What device does the switch of this symbol control?

A. window glasses of both sides

B. electric door

C. door unlock

D. child safety lock

Answer: C

5. What marking are the white serrated solid lines in the circle?

A. guide lane lines

B. direction guide line

C. variable guide lane line

D. one-way driving line

Answer: C

6. When a vehicle encounters a bike rider coming in the opposite direction on the road, the driver should _________.

A. Continuously change the high and low bean lights

B. Continuously honk

C. Use the low beam light, reduce speed or stop to evade

D. Use the high beam light

Answer: C

7. This sign reminds embankment road ahead.

A. Right

B. Wrong

Answer: B

8. When driving a motorized vehicle uphill, you should speed up and honk when you going to reach the top of the slope.

A. Right

B. Wrong

Answer: B

9. These signs warn the driver danger ahead and passing with care.

A. Right

B. Wrong

Answer: A

10. Driving a small passenger vehicle on the expressway, the minimum speed should not be less than 90 kilometers per hour.

A. Right

B. Wrong

Answer: B

11. Whats the meaning of this sign?

A. stop and yield the right side vehicle while crossing each other

B. no passing on the right side road

C. two-way lane section ahead

D. stop and yield the opposite vehicle while crossing each other

Answer: D

12. Whats the meaning of this sign?

A. stopping temporarily is allowed

B. long stopping is allowed

C. no long stopping

D. no stopping

Answer: D

13. A person whose driving license has been destroyed cannot drive a motorized vehicle.

A. Right

B. Wrong

Answer: A

14. It lights when turning on the left-turn signal.

A. Right

B. Wrong

Answer: B

15. What does this symbol indicate?

A. snowy starting mode

B. air circulation

C. air condition cooling mode

D. cooling or warming fan

Answer: D

16. The safety pillow is used to protect the driver‘s head when there is a rear-end collision.

A. Right

B. Wrong

Answer: B

17. Traffic signals include Traffic lights, Traffic signs and Command of the traffic police.

A. Right

B. Wrong

Answer: A

18. What is this manipulation device?

A. the air throttle lever

B. the gear lever

C. the clutch lever

D. the handbrake

Answer: D

19. When driving at night, the driver should try as much as possible to avoid overtaking. When he really needs to overtake, he may switch the high and low beam lights to alert the vehicle in front.

A. Right

B. Wrong

Answer: A

20. If the applicant commits bribery or cheating in the course of a test, his eligibility for this test will be cancelled and the results of other tests he has passed will be invalid.

A. Right

B. Wrong

Answer: A

21. Whats the meaning of this sign?

A. continuous down slopes

B. steep downhill road

C. steep uphill road

D. continuous up slopes

Answer: A

22. This sign warns obstacles ahead and reducing speed to bypass.

A. Right

B. Wrong

Answer: B

23. In which situation cannot overtake a vehicle in front?

A. vehicle in front is reducing speed to yield

B. vehicle in front is turning left

C. vehicle in front is pulling over by the roadside

D. vehicle in front is turning right

Answer: B

24. When a vehicle goes uphill, the driver should observe the road conditions and the length of the slope in advance and shift to the lower gear in a timely manner to ensure the vehicle has sufficient power.

A. Right

B. Wrong

Answer: A

25. What marking is the combination of the white broken lines and the triangle area?

A. road entry marking

B. lane-dividing line that can be crossed

C. deceleration line at road exit

D. road exit marking

Answer: D