六盘水英文驾考科目

1. Whats the meaning of this sign?

A. hump bridge

B. high outburst road

C. low-lying road

D. bump road

Answer: A

2. How to do when the vehicle breaks down on road and needs to stop to solve the problem?

A. stop in the middle of the road

B. stop the vehicle where will not interfere the traffic

C. turn on the low beam lights or fog lights

D. stop on the spot to solve the problem

Answer: B

3. Which part does this switch control?

A. windscreen defogger

B. windscreen wiper

C. the hazard lights

D. devices of lights and signals

Answer: B

4. If the driver finds there is no vehicle following, he can change lanes without turning on the turn signal.

A. Right

B. Wrong

Answer: B

5. You can not drive a motorized vehicle into the lane where the red X-shaped light or the red arrow light is on.

A. Right

B. Wrong

Answer: A

6. A motorized vehicle driver who uses other motorized vehicles license plate and vehicle license is subject to a 3-point penalty.

A. Right

B. Wrong

Answer: B

7. Whats the meaning of this sign?

A. right-turn lane

B. U turn lane

C. left-turn lane

D. lanes for going in different directions

Answer: C

8. Causing a traffic accident due to violating the law and regulations on road traffic safety is the rule-breaking act.

A. Right

B. Wrong

Answer: B

9. Must reduce the frequency of honking in this section.

A. Right

B. Wrong

Answer: B

10. How to use lights at night while crossing each other on narrow road or bridge?

A. turn off all the lights

B. turn on the low beam lights

C. turn off the head lights

D. turn on high beam lights

Answer: B

11. Whats the meaning of this sign?

A. watch for danger

B. bypass from right side

C. bypass from left side

D. one-way pass

Answer: C

12. Whats the meaning of the double white broken lines in far front of the intersection?

A. waiting to run line

B. stopping and yield line

C. slowdown and yield line

D. left-turn waiting line

Answer: C

13. When driving at night, the drivers observation ability is visibly poorer and his visibility range becomes shorter than driving in the daytime.

A. Right

B. Wrong

Answer: A

14. Cannot make a U turn in this section.

A. Right

B. Wrong

Answer: A

15. When ignition switch is in the START position, the starter starts.

A. Right

B. Wrong

Answer: A

16. When running on the road having maximum speed limit signs, the motorized vehicle is not allowed to exceed the marked maximum speed.

A. Right

B. Wrong

Answer: A

17. This sign warns the driver there is a crosswalk ahead.

A. Right

B. Wrong

Answer: B

18. It lights to indicate that luggage compartment is open.

A. Right

B. Wrong

Answer: B

19. The main impact of muddy roads on safe driving is _________.

A. The resistance to the vehicle becomes weaker

B. The tires can easily spin and skid

C. The visibility become lower and blurs the field of vision

D. The road grip becomes stronger

Answer: B

20. Whats the meaning of this sign?

A. section narrows on both sides

B. section for speed test

C. section for ascertaining the distance between the vehicles

D. pay attentions to keeping distance

Answer: D

21. When changing lanes on an expressway, the driver should turn on the turn signal in advance, observe the traffic conditions, and slowly turn the steering wheel and enter the new lane after making sure it is safe to do so.

A. Right

B. Wrong

Answer: A

22. If a vehicle has the right of way at an intersection but encounters a vehicle cutting in, the driver should _________.

A. Rush to pass

B. Speed up in advance and pass

C. Reduce speed and evade, or stop to yield when necessary

D. Go forward at the normal speed according to the right of way and refuses to evade

Answer: C

23. Change driving license before of expiration.

A. 60 days

B. 30 days

C. 90 days

D. 6 months

Answer: C

24. When driving slowly in a congested road, the driver should ________ if another vehicle forcefully cuts in.

A. Honk to warn it against cutting in

B. Speed up to closely follow the vehicle in front and refuse to allow it to cut in

C. Squeeze the cutting-in vehicle to force it to leave

D. Voluntarily yield to ensure safe driving

Answer: D

25. What is the main role of the seat belt when there is a collision?

A. to protect the driver and passengers necks

B. to protect the driver and passengers chests

C. to reduce the injuries of the driver and passengers

D. to protect the driver and passengers waists

Answer: C