兰州驾考英文版手机版

1. What is the Minimum speed on this expressway?

A. 100km/hr

B. 80km/hr

C. 60km/hr

D. 50km/hr

Answer: C

2. Whats the meaning of this sign?

A. landslide section

B. construction section

C. factory ahead

D. jammed road

Answer: B

3. Whats the meaning of this sign?

A. embankment road

B. cliffside road

C. waterside road

D. slippery road

Answer: A

4. Whats the meaning of this sign?

A. expressway entry ahead

B. expressway ending ahead

C. expressway beginning ahead

D. expressway exit ahead

Answer: A

5. This sign indicates running slowly or stopping to let the vehicle on main road go first.

A. Right

B. Wrong

Answer: A

6. This sign indicates construction section ahead and bypassing from left or right side.

A. Right

B. Wrong

Answer: B

7. Whats the meaning of this sign?

A. no borrowing lane

B. no changing lane

C. no overtaking

D. no U turn

Answer: C

8. Whats the meaning of this sign?

A. ring intersection ahead

B. intersection ahead

C. Y-shaped intersection ahead

D. T-shaped intersection ahead

Answer: C

9. Whats the meaning of the white solid line in the middle of the road?

A. unilateral same direction lanes dividing line that can be crossed

B. same direction lanes dividing line that can not be crossed

C. bilateral same direction lanes dividing line that can be crossed

D. opposite direction lanes dividing line that can not be crossed

Answer: B

10. Whats the meaning of this sign?

A. the distance from the tunnel exit

B. the distance from the tunnel entry

C. the distance of following the vehicle in front in the tunnel

D. the whole length of the tunnel

Answer: A

11. What marking is the white solid lines in the circle?

A. guide lanes lines

B. variable guide lanes lines

C. direction guide lines

D. one-way driving lines

Answer: A

12. What is this manipulation device?

A. the handbrake

B. the air throttle lever

C. the gear lever

D. the clutch lever

Answer: C

13. When finding a vehicle in the opposite direction having difficulty to go forward and needing to borrow road while crossing each other, the driver should ________.

A. Not occupy the road of the other side and should go forward normally

B. Indicate the other side to stop and yield

C. Speed up and go forward by the right side

D. Yield to the other side as much as possible

Answer: D

14. Whats the meaning of these white rectangle markings?

A. long time parking

B. time limited parking

C. free parking

D. special parking

Answer: B

15. How to use lights at night while crossing each other on narrow road or bridge?

A. turn off all the lights

B. turn on the low beam lights

C. turn off the head lights

D. turn on high beam lights

Answer: B

16. When the traffic conditions at an intersection are complicated, the driver should be patiently waiting instead of taking chance.

A. Right

B. Wrong

Answer: A

17. Whats the meaning of the marking in the red circle?

A. temporary stopping

B. large bus stopping

C. bus station

D. emergency stopping

Answer: C

18. This set of the hand signals of the traffic police indicates that the vehicles should ____ .

A. reduce speed and pass slowly

B. pull over

C. stop

D. turn right

Answer: D

19. When passing an intersection without traffic lights, the driver should go through as fast as possible.

A. Right

B. Wrong

Answer: B

20. The front safety bags play a fully protective role when used in conjunction with ______

A. ABS system

B. seat belt

C. safety pillow of the chair

D. safety glasses

Answer: B

21. How the front vehicle to run in this situation?

A. run as normal

B. yield

C. turn on the hazard lights

D. should not change lane

Answer: B

22. Before the motorized vehicle runs on the road, the driver should check the safety and technical performance of the vehicle.

A. Right

B. Wrong

Answer: A

23. The main impact of the road conditions in icy and snowy weather is ______.

A. The electric equipment can easily get wet and cause short circuit

B. The visibility is lower and the field of vision is blurred

C. The resistance to the vehicle increases

D. Poor braking performance and Side pulling

Answer: D

24. When driving at night, the driver should reduce speed and go forward if the vehicle coming in the opposite direction fails to turn off the high beam light. This is designed to prevent an accident from happening when there are pedestrians crossing the place where the lights of the two vehicles meet.

A. Right

B. Wrong

Answer: A

25. What marking is the two white broken lines in the circle?

A. stop lines at crossroad

B. left-turn waiting areas

C. U turn guide lines

D. small vehicles turning lines

Answer: B