临沂Chinese Driving License Test

1. A driver should drive the vehicles in accordance with the qualification listed on the driving license.

A. Right

B. Wrong

Answer: A

2. This sign warns the driver there have traffic lights ahead.

A. Right

B. Wrong

Answer: A

3. What is the Minimum speed on this expressway?

A. 100km/hr

B. 80km/hr

C. 60km/hr

D. 50km/hr

Answer: C

4. 7.When a vehicle changes lane before an intersection, the driver should do so ______.

A. In the area marked by solid lines before the intersection

B. In the area marked by solid lines in the intersection

C. In the area marked by broken lines as indicated by the guide arrow

D. Before the stop line at the intersection

Answer: C

5. What causes the rear-end collision?

A. not observe through the rear-view mirror while the vehicle in front brakes

B. the vehicle in front brakes suddenly

C. distance from the vehicle in front is too close when the rear vehicle overtakes

D. not maintain a safe distance from the vehicle in front

Answer: D

6. Whats the meaning of this sign?

A. pass with low speed

B. watch for pedestrians

C. on foot

D. pedestrians go first

Answer: C

7. Driving a small passenger vehicle on the expressway, the minimum speed should not be less than 90 kilometers per hour.

A. Right

B. Wrong

Answer: B

8. When overtaking, the driver should try his best to increase the horizontal distance and,when necessary, may cross the solid line to overtake.

A. Right

B. Wrong

Answer: B

9. Traffic Police can detain the vehicle according to law if it uses other vehicles license plate and vehicle license.

A. Right

B. Wrong

Answer: A

10. ABS system can maximize the braking efficiency when conducting _______

A. braking intermittently

B. braking continuously

C. applying emergency braking

D. gently depressing the brake pedal

Answer: C

11. What marking is the white polylines in the circle?

A. ascertaining the distance between the vehicles

B. driving at reduced speed

C. ascertaining the speed of the vehicles

D. reducing the speed at the intersection

Answer: A

12. Whats the meaning of this sign?

A. no right turn

B. no U turn

C. no going straight

D. no left turn

Answer: C

13. What marking are the white serrated solid lines in the circle?

A. guide lane lines

B. direction guide line

C. variable guide lane line

D. one-way driving line

Answer: C

14. If a vehicle may encounter a vehicle coming in the opposite direction in the course of overtaking, the driver should speed up in advance and overtake.

A. Right

B. Wrong

Answer: B

15. After starting the engine, it lights to indicate that ______

A. fuel pump abnormal or malfunction

B. ignition system malfunction

C. fuel supply system is abnormal

D. fuel in tank reaches the minimum level

Answer: D

16. In which situation cannot overtake a vehicle in front?

A. vehicle in front is reducing speed to yield

B. vehicle in front is turning left

C. vehicle in front is pulling over by the roadside

D. vehicle in front is turning right

Answer: B

17. When a vehicle changes lane, the driver should turn on the turn signal and rapidly enter the new lane.

A. Right

B. Wrong

Answer: B

18. Reducing the speed to yield when encountering this situation in the intersection.

A. Right

B. Wrong

Answer: A

19. The motorized vehicle driver is not allowed to drive a motorized vehicle when his driving license is detained.

A. Right

B. Wrong

Answer: A

20. When a vehicle approaches a crosswalk, the driver should ________.

A. Speed up and pass

B. Stop immediately

C. Honk to indicate the pedestrians to yield

D. Observe the movement of pedestrians and non-motorized vehicles, make sure it is safe before passing

Answer: D

21. This sign reminds serious bump road ahead.

A. Right

B. Wrong

Answer: B

22. The method and direction of changing lanes by the red car is correct.

A. Right

B. Wrong

Answer: B

23. Reduce speed or stop to look before the stop line when encountering this traffic light at the intersection.

A. Right

B. Wrong

Answer: B

24. Whats the meaning of this sign?

A. customs inspection

B. stop-for-inspection

C. frontier inspection

D. no passing

Answer: B

25. When a vehicle passes a level crossing, the driver should use the low gear to pass and should not change gear halfway in order to avoid engine kill.

A. Right

B. Wrong

Answer: A