武汉科目一考题英文版

1. What kind of marking are the double yellow solid lines in the middle of the road?

A. auxiliary marking

B. warning sign

C. prohibitive marking

D. indicative marking

Answer: C

2. Violating the law and regulations on road traffic safety is the act of violation of the law.

A. Right

B. Wrong

Answer: A

3. In the course of reversing, the driver should move slowly, observe the conditions on both sides and in the rear and be ready to stop anytime.

A. Right

B. Wrong

Answer: A

4. After entering the acceleration lane of an expressway, the driver should increase the speed to more than _________ per hour.

A. 50

B. 60

C. 30

D. 40

Answer: B

5. When a vehicle starts to move, the driver should first turn on the low beam light.

A. Right

B. Wrong

Answer: A

6. Whats the meaning of this sign?

A. stop by the left side of the road

B. downhill section left

C. left turn only

D. run by the left side of the road

Answer: D

7. Whats the meaning of this sign?

A. customs inspection

B. stop-for-inspection

C. frontier inspection

D. no passing

Answer: B

8. Whats the meaning of this figure mark on the road?

A. a mark of keeping distance

B. a mark of minimum distance

C. a mark of speed limit

D. a mark of road number

Answer: C

9. It lights to indicate that ______

A. windscreen wash lacks

B. braking oil lacks

C. cooling system malfunction

D. coolant lacks

Answer: D

10. When encountering stopping and waiting in turn or slow-moving vehicles in front, the motorized vehicle may _________.

A. borrow road to overtake

B. occupy the opposite lane

C. follow the vehicles in front

D. cut in the waiting vehicles

Answer: C

11. When a following vehicle gives the overtaking signal, the driver should ________ if conditions permit.

A. Move to the right side and speed up

B. Voluntarily reduce speed and drive along the right side

C. Yield a proper space and speed up

D. Reduce speed rapidly or apply an emergency braking

Answer: B

12. Whats the meaning of this sign?

A. more vehicles section

B. passing slowly

C. jammed section

D. construction section

Answer: B

13. These signs warn the driver danger ahead and passing with care.

A. Right

B. Wrong

Answer: A

14. From which side to overtake?

A. both sides

B. right side

C. left side

D. the side with no obstacle

Answer: C

15. What device does the switch of this symbol control?

A. the windscreen defrosting or defogging

B. the rear window wiper and washer

C. the windscreen wiper and washer

D. the rear window defrosting or defogging

Answer: C

16. What is the Minimum speed in this lane?

A. 100km/hr

B. 110km/hr

C. 60km/hr

D. 90km/hr

Answer: D

17. When the vehicle has changed its direction due to a front tire blowout on the road, the driver should firmly hold the steering wheel with both hands to ensure the vehicle goes straight.

A. Right

B. Wrong

Answer: A

18. What kind of violation does this car have while stopping temporarily by the roadside?

A. stop occupying the lane for motorized vehicles

B. stop more than 30cm from the roadside

C. stop in the section with no stopping marking

D. stop occupying the lane for non-motorized vehicles

Answer: C

19. A motorized vehicle driver who uses other motorized vehicles license plate and vehicle license is subject to a 3-point penalty.

A. Right

B. Wrong

Answer: B

20. You can overtake from both sides in this case.

A. Right

B. Wrong

Answer: B

21. Whats the meaning of this sign?

A. provincial highway No.

B. national highway No.

C. county road No.

D. township road No.

Answer: C

22. Whats the meaning of this sign?

A. pass with low speed

B. watch for pedestrians

C. on foot

D. pedestrians go first

Answer: C

23. A motorized vehicle driver who escapes or commits other extremely serious acts after causing a major accident in violation of the traffic regulations is subject to a prison term of more than 7 years.

A. Right

B. Wrong

Answer: B

24. What is the max speed on this highway?

A. 30km/hr

B. 40km/hr

C. 50km/hr

D. 70km/hr

Answer: D

25. Steering wheel will be locked if removing the key while the ignition switch is in the LOCK position.

A. Right

B. Wrong

Answer: A