龙岩驾考英文版手机版

1. Ignition switch in the ON position, the vehicle can not use electrical appliances.

A. Right

B. Wrong

Answer: B

2. When a vehicle on the main road approaches a conjunction with a feeder road, the driver should ______ in order to prevent a collision with a vehicle that suddenly enters from the feeder road.

A. Maintain the normal speed

B. Reduce speed in advance, observe and drive with care

C. Honk and swiftly pass

D. Speed up in advance and pass

Answer: B

3. When driving a vehicle on the road, the driver should drive safely at the prescribed speed.

A. Right

B. Wrong

Answer: A

4. A vehicle is not allowed to reverse on the ramp of an expressway.

A. Right

B. Wrong

Answer: A

5. When a vehicle reaches a sharp curve, the driver should _______.

A. Brake suddenly and go slowly

B. Drive along the outer side of the curve

C. Fully reduce speed and drive on the right side

D. Go forward by borrowing the opposite lane

Answer: C

6. What marking is it?

A. prohibitive area

B. cross-hatched marking

C. guide line

D. central circle

Answer: D

7. When the road maintenance vehicle and the engineering vehicle are on duty, the passing vehicles should avoid with care.

A. Right

B. Wrong

Answer: A

8. A motorized vehicle driver who uses falsified and altered license plate is subject to a ________.

A. 2-point penalty

B. 3-point penalty

C. 12-point penalty

D. 6-point penalty

Answer: C

9. Whats the meaning of this sign?

A. straight-going lane

B. going straight only

C. one-way road

D. no going straight

Answer: B

10. What is this manipulation device?

A. air conditioner switch

B. ignition switch

C. wiper switch

D. light switch

Answer: B

11. A motorized vehicle driver who uses falsified or altered driving license is subject to a 12-point penalty.

A. Right

B. Wrong

Answer: A

12. When starting up a vehicle stopping at the roadside, the driver should first ________.

A. Depress the accelerator pedal and start

B. Honk

C. Increase engine rotation speed

D. Observe the conditions around the vehicles

Answer: D

13. How to do when the vehicle breaks down on road and needs to stop to solve the problem?

A. stop in the middle of the road

B. stop the vehicle where will not interfere the traffic

C. turn on the low beam lights or fog lights

D. stop on the spot to solve the problem

Answer: B

14. When a vehicle passes a school or a residential area, the driver should observe the signs and markings, go slowly and refrain from honking.

A. Right

B. Wrong

Answer: A

15. When following a vehicle, the following vehicle may use the high beam light.

A. Right

B. Wrong

Answer: B

16. Which is correct if a vehicle breaks down and is difficult to move?

A. turn on the hazard lights

B. turn on all the lights of the vehicle

C. forbid the passengers to get off

D. place a warning sign in front of the vehicle

Answer: A

17. Whats the meaning of this sign?

A. accident-prone section

B. construction section

C. reducing speed and going slowly section

D. jammed section

Answer: A

18. As the traffic flow at an interchange is generally one-way, the vehicles do not have to reduce speed when passing.

A. Right

B. Wrong

Answer: B

19. Whats the meaning of this sign?

A. expressway bus station ahead

B. expressway shelter ahead

C. expressway service area ahead

D. expressway toll station ahead

Answer: C

20. When driving a vehicle through an inundated road with non-motorized vehicles on both sides, the driver should _________.

A. Reduce speed and go slowly

B. Go forward normally

C. Speed up and pass

D. Continuously honk

Answer: A

21. Whats the meaning of this sign?

A. right-turn lane

B. U turn lane

C. left-turn lane

D. straight-going lane

Answer: D

22. When a vehicle wades across the water, the driver should maintain a low speed, and _____ the brake pedal so as to restore the braking efficiency.

A. Continuously and strongly depress

B. Intermittently and strongly depress

C. Continuously and gently depress

D. Intermittently and gently depress

Answer: D

23. In the course of making a U turn, the driver should strictly control the speed, carefully observe the road conditions before and behind the vehicle, and may advance or reverse only if it is safe to do so.

A. Right

B. Wrong

Answer: A

24. This sign indicates construction section ahead and bypassing from left or right side.

A. Right

B. Wrong

Answer: B

25. Using the high and low beam lights alternately while driving on the road of this kind of sharp curve.

A. Right

B. Wrong

Answer: A