延安考驾照英文题库

1. Before entering a level crossing, the vehicle should reduce speed and change to a lower gear, and _____ after entering the level crossing.

A. Cannot change gear

B. Can change gear

C. Can change to a higher gear

D. Stop and look

Answer: A

2. Whats the meaning of this sign?

A. intersection

B. ring intersection

C. T-shaped intersection

D. Y-shaped intersection

Answer: A

3. This small car can not stop here.

A. Right

B. Wrong

Answer: A

4. What kind of marking are the double yellow solid lines in the middle of the road?

A. auxiliary marking

B. warning sign

C. prohibitive marking

D. indicative marking

Answer: C

5. Whats the meaning of this guide arrow?

A. changing to left lane

B. going straight ahead

C. left turn ahead

D. right turn ahead

Answer: C

6. Choose the lane with the green arrow light on.

A. Right

B. Wrong

Answer: A

7. When a vehicle stops temporarily in a rainy day, the driver should turn on ______.

A. The head and tail fog lights

B. The hazard lights

C. The high beam light

D. The reverse light

Answer: B

8. Whats the meaning of this sign?

A. stop to yield

B. one-way road

C. going first when crossing each other

D. the opposite vehicle goes first when crossing each other

Answer: C

9. What should the driver do if conditions permit when a following vehicle gives the overtaking signal on a road without a central line?

A. maintain the original speed

B. speed up

C. reduce speed, move to the right side and yield

D. immediately stop and yield

Answer: C

10. The police can detain the vehicle if one drives a vehicle without ______

A. vehicle license

B. qualification certificate

C. ID card

D. pass paper

Answer: A

11. Whats the meaning of this sign?

A. lane information indication

B. road branching point ahead

C. place and distance indication

D. intersection ahead

Answer: D

12. When driving at night on a road with no or poor lighting, the driver should switch from the low beam light to the high beam light. But the vehicle following in the same direction is not allowed to use the high beam light.

A. Right

B. Wrong

Answer: A

13. When a motorized vehicle breaks down at night, and is difficult to move, the driver should turn on the hazard lights, the contour lights and the tail lights.

A. Right

B. Wrong

Answer: A

14. If a motorized vehicle causes a traffic accident on the expressway and cannot to run normally, the vehicle should be towed by a rescue vehicle or a tow truck.

A. Right

B. Wrong

Answer: A

15. It lights to remind that engine coolant may be insufficient.

A. Right

B. Wrong

Answer: A

16. Whats the meaning of this sign?

A. customs inspection

B. stop-for-inspection

C. frontier inspection

D. no passing

Answer: B

17. It lights to indicate that ______

A. not buckled up

B. safety belt malfunction

C. the safety belts are too loose

D. buckled up already

Answer: A

18. This set of the hand signals of the traffic police indicates that the vehicles should ____ .

A. turn right

B. change lane

C. reduce speed and pass slowly

D. pull over

Answer: C

19. Which part does this switch control?

A. windscreen defogger

B. windscreen wiper

C. the hazard lights

D. devices of lights and signals

Answer: B

20. Which lane to choose when turning left in this intersection?

A. the far left lane

B. middle lane

C. not need to change lane

D. the far right lane

Answer: A

21. When encountering an overflowing bridge, the driver should look at the situation, and passes through slowly before he makes sure that it is safe to do so.

A. Right

B. Wrong

Answer: A

22. What should a motorized vehicle has while running on the road?

A. a label of keeping distance

B. a label of reminding danger

C. a label of inspection

D. a label of product qualification

Answer: C

23. Whats the meaning of this sign?

A. road narrows on the left side

B. narrow bridge

C. narrow road

D. road narrows on the right side

Answer: B

24. Driving a motorized vehicle on the expressway is not allowed to exceed the marked maximum speed.

A. Right

B. Wrong

Answer: A

25. When reaching an intersection, the driver should _____ if a turning vehicle cuts in.

A. Stop to evade

B. Maintain the normal speed

C. Speed up and pass ahead of it

D. Honk and pass ahead of it

Answer: A