淮北2025科目一考试英文

1. When the vehicle has changed its direction due to a front tire blowout on the road, the driver should firmly hold the steering wheel with both hands to ensure the vehicle goes straight.

A. Right

B. Wrong

Answer: A

2. It lights when turning on the front low beam lights.

A. Right

B. Wrong

Answer: B

3. Within the validity of the Admission Form, the times of test reservation for Driving Skills of subject 2 and subject 3 can not exceed ______

A. 3 times

B. 4 times

C. 5 times

D. 6 times

Answer: C

4. Driving motor vehicle with ABS system may occur side skidding when applying emergency braking.

A. Right

B. Wrong

Answer: A

5. What marking is it?

A. prohibitive area

B. cross-hatched marking

C. guide line

D. central circle

Answer: D

6. A motorized vehicle driver who has not yielded to the school bus according to stipulations is subject to a 6-point penalty.

A. Right

B. Wrong

Answer: A

7. What device does the switch of this symbol control?

A. the windscreen defrosting or defogging

B. the rear window wiper and washer

C. the windscreen wiper and washer

D. the rear window defrosting or defogging

Answer: C

8. Whats the meaning of this sign?

A. right-turn lane

B. U turn lane

C. left-turn lane

D. lanes for going in different directions

Answer: A

9. Pass the crossing as fast as possible if there is a red light at the intersection of a road or a level crossing.

A. Right

B. Wrong

Answer: B

10. When a vehicle stops temporarily in a rainy day, the driver should turn on ______.

A. The head and tail fog lights

B. The hazard lights

C. The high beam light

D. The reverse light

Answer: B

11. When following a vehicle, the following vehicle may use the high beam light.

A. Right

B. Wrong

Answer: B

12. 7.When a vehicle changes lane before an intersection, the driver should do so ______.

A. In the area marked by solid lines before the intersection

B. In the area marked by solid lines in the intersection

C. In the area marked by broken lines as indicated by the guide arrow

D. Before the stop line at the intersection

Answer: C

13. Whats the role of the indicative marking?

A. No passing

B. indicate vehicles to pass

C. restrict from passing

D. warn and remind

Answer: B

14. Whats the meaning of the yellow solid line on the curbstone?

A. only for taking and dropping people

B. only for loading and unloading cargos

C. no long stopping

D. no parking

Answer: D

15. Stopping temporarily on the road should not obstruct the passing of other vehicles and pedestrians.

A. Right

B. Wrong

Answer: A

16. Whats the meaning of this sign?

A. right-turn lane

B. U turn lane

C. left-turn lane

D. straight-going lane

Answer: D

17. Whats the meaning of this sign?

A. expressway mileage No.

B. expressway border plate No.

C. expressway name No.

D. expressway section No.

Answer: C

18. The red car can run in this lane.

A. Right

B. Wrong

Answer: B

19. Whats the meaning of this sign?

A. police call number on expressway

B. public phone on expressway

C. emergency call number on expressway

D. rescue call number on expressway

Answer: D

20. Stop the vehicle and observe when reaching the level crossing in this situation.

A. Right

B. Wrong

Answer: A

21. The wrong measure to avoid tire blowout is to _________.

A. Reduce tire pressure

B. Check the tires regularly

C. Remove objects from tire tread grooves in a timely manner

D. Replace the tire that has cracks or deep cuts

Answer: A

22. What is the max speed on the expressway when the visibility is lower than 100 meters?

A. less than 40km/hr

B. less than 60km/hr

C. less than 80km/hr

D. less than 90km/hr

Answer: A

23. What is this instrument?

A. water temperature meter

B. fuel meter

C. ammeter

D. pressure meter

Answer: A

24. According to rules on the road traffic safety, the maximum speed on the expressway is less than 120km/hr, thus, it will not be in violation of the traffic regulations as long as the speed does not exceed 120km/hr on the expressway.

A. Right

B. Wrong

Answer: B

25. What mark is the inclined yellow and black lines?

A. entity mark

B. protrusions mark

C. three-dimensional mark

D. deceleration mark

Answer: C