怒江2026科目一考试英文

1. What is this manipulation device?

A. switch of windscreen wiper

B. switch of the head lights

C. switch of the turn signal

D. switch of defogger

Answer: A

2. Driving on the expressway with full signs and marking, the driver should run in the lane and at the speed according to _________.

A. Signs and markings

B. Rules on road traffic safety

C. Vehicle manual

D. Local regulations

Answer: A

3. When reaching a sharp curve, the driver should reduce speed and drive on the right side so as to avoid colliding with the vehicle crossing the central line of the curve in the opposite direction.

A. Right

B. Wrong

Answer: A

4. Whats the meaning of this sign?

A. streets on both sides

B. main road go first

C. stop to yield

D. one-way road

Answer: B

5. When ignition switch is in the START position, the starter starts.

A. Right

B. Wrong

Answer: A

6. The starter works when turning the ignition switch to the ACC position.

A. Right

B. Wrong

Answer: B

7. Whats the meaning of this sign?

A. no changing lane

B. no left turn

C. no going straight

D. no U turn

Answer: D

8. Whats the meaning of this sign?

A. overflowing bridge

B. ferry

C. pier

D. overflowing road

Answer: B

9. When a motorized vehicle breaks down on the expressway, the driver should place a warning sign 50 meters ~ 100 meters in the coming direction.

A. Right

B. Wrong

Answer: B

10. The main impact of the road conditions at night on safe driving is ________.

A. The visibility is low and unfavorable for observing road traffic conditions

B. The road surface is complex and changing

C. The physical strength of the driver decreases

D. The driver can easily have impulse and illusion

Answer: A

11. Whats the meaning of this sign?

A. 3m width limit ahead

B. 3m width limit

C. the 3m width limit ban is lifted

D. 3m height limit

Answer: B

12. This sign indicates obstacle ahead and bypassing from left side.

A. Right

B. Wrong

Answer: A

13. The full mark of Driving Skills, Common Knowledge on Safe and Courteous Driving of the subject 3 test is 100, each of the passing mark is 80 and 90.

A. Right

B. Wrong

Answer: B

14. Speed up when passing the overflowing road.

A. Right

B. Wrong

Answer: B

15. Whats the meaning of this sign?

A. road narrows on the left side

B. narrow bridge

C. narrow road

D. road narrows on the right side

Answer: B

16. What does this symbol indicate?

A. luggage compartment is opened

B. door of one side is opened

C. engine compartment is opened

D. cover of fuel tank is opened

Answer: A

17. The hazard lights can be used when ________

A. encountering traffic congestion

B. following a vehicle on road

C. the vehicle breaks down and stops

D. leading the vehicle behind

Answer: C

18. The contents of subject 2 test for small motor vehicle include Reversing stall parking, stopping at the appointed position and setting off on a slope, pulling over, driving by S-shaped line, sharp turning.

A. Right

B. Wrong

Answer: A

19. When overtaking on a mountain road, the vehicle should overtake ______.

A. By taking every possible chance

B. By selecting a wide gentle uphill section

C. By selecting a fairly long downhill section

D. By selecting a relatively gentle downhill section

Answer: B

20. This sign reminds the width of the bridge narrows ahead.

A. Right

B. Wrong

Answer: B

21. When a vehicle starts to move, the driver should first turn on the low beam light.

A. Right

B. Wrong

Answer: A

22. What kind of marking are the double yellow solid lines in the middle of the road?

A. auxiliary marking

B. warning sign

C. prohibitive marking

D. indicative marking

Answer: C

23. When encountering a traffic jam on the expressway, the driver should follow the front vehicle lining up, and immediately turn on the hazard light to prevent rear-end collision.

A. Right

B. Wrong

Answer: A

24. When encountering non-motorized vehicles cutting in on the road, the driver should ___.

A. Honk to warn

B. Speed up and pass

C. Reduce speed and yield

D. Suddenly speed up when approaching

Answer: C

25. When reaching an intersection, the driver should _____ if a turning vehicle cuts in.

A. Stop to evade

B. Maintain the normal speed

C. Speed up and pass ahead of it

D. Honk and pass ahead of it

Answer: A