银川考驾照英文试题

1. It lights when turning on the front high beam lights.

A. Right

B. Wrong

Answer: B

2. Whats the meaning of this mark on the road?

A. average speed is 100km/hr

B. minimum speed limit is 100km/hr

C. 100km/hr speed limit ban is lifted

D. maximum speed limit is 100km/hr

Answer: D

3. Whats the meaning of this sign?

A. T-shaped intersection ahead

B. road branching point ahead

C. Y-shaped intersection ahead

D. intersection ahead

Answer: A

4. When encountering children on the road, the driver should _________.

A. Reduce speed and go slowly, or stop to yield when necessary

B. Continuously honk to urge

C. Swiftly bypass from one side

D. Speed up and bypass

Answer: A

5. When passing an unmanned level crossing, the driver should ________.

A. Speed up and pass

B. Reduce speed and pass

C. Maintain the speed and pass

D. Stop, look and pass

Answer: D

6. No U turn at this section.

A. Right

B. Wrong

Answer: B

7. After starting the engine, it lights to indicate that ______

A. engine main oil way blockage

B. engine oil pressure is too low

C. engine crankshaft box leaks

D. engine oil pressure is too high

Answer: B

8. It lights if left door is not closed.

A. Right

B. Wrong

Answer: B

9. When a vehicle encounters a bike rider coming in the opposite direction on the road, the driver should _________.

A. Continuously change the high and low bean lights

B. Continuously honk

C. Use the low beam light, reduce speed or stop to evade

D. Use the high beam light

Answer: C

10. When a vehicle passes a narrow road or bridge, it is prohibited from overtaking.

A. Right

B. Wrong

Answer: A

11. What pedal is it?

A. clutch pedal

B. brake pedal

C. handbrake

D. accelerator pedal

Answer: A

12. When causing a road accident involving human casualties, the driver should immediately rescue the injured people and report to the traffic police as soon as possible.

A. Right

B. Wrong

Answer: A

13. How to pass the intersection when running straight

A. turn on the hazard lights and pass

B. directly speed up and pass straight

C. yield to the vehicle from the right road

D. yield to the vehicle from the left road

Answer: C

14. It lights to remind that the driver has not buckled up.

A. Right

B. Wrong

Answer: A

15. When a vehicle changes lane, the driver only needs to turn on the turn signal before rapidly entering the new lane.

A. Right

B. Wrong

Answer: B

16. What is this manipulation device?

A. the air throttle lever

B. the gear lever

C. the clutch lever

D. the handbrake

Answer: D

17. A rear tire blowout can sway the tail of the vehicle. The driver should firmly hold the steering wheel with both hands to ensure the vehicle go straight, reduce speed and then stop.

A. Right

B. Wrong

Answer: A

18. Whats the meaning of this sign?

A. right-turn lane

B. U turn lane

C. left-turn lane

D. straight-going lane

Answer: D

19. When driving a motorized vehicle uphill, you should speed up and honk when you going to reach the top of the slope.

A. Right

B. Wrong

Answer: B

20. Whats the meaning of this sign?

A. streets on both sides

B. main road go first

C. stop to yield

D. one-way road

Answer: B

21. This sign reminds the road in front changes to inseparate two ways section.

A. Right

B. Wrong

Answer: A

22. When braking on a muddy road, the tires can easily spin or drift and cause traffic accidents.

A. Right

B. Wrong

Answer: A

23. You should speed up through the section with this kind of traffic marking.

A. Right

B. Wrong

Answer: B

24. How to run at this position when leaving the expressway?

A. enter the deceleration lane

B. keep running forward

C. keep the speed at 100km/hr

D. reduce the speed to less than 40km/hr

Answer: A

25. What is the main role of the seat belt when there is a collision?

A. to protect the driver and passengers necks

B. to protect the driver and passengers chests

C. to reduce the injuries of the driver and passengers

D. to protect the driver and passengers waists

Answer: C