滁州驾考英文版

1. What is this manipulation device?

A. switch of windscreen wiper

B. switch of the head lights

C. switch of the turn signal

D. switch of defogger

Answer: A

2. When a vehicle passes a bumped road, the driver should ________.

A. Speed up and dash over under inertia

B. Change to the neutral gear and slide over

C. Maintain the original speed and pass

D. Pass slowly and steadily

Answer: D

3. When a vehicle is being overtaken by another vehicle, and there is a vehicle following behind, the driver should _____.

A. continue to speed up and run

B. turn slightly to the right side, keep a safe horizontal distance

C. run by road center

D. speed up to the right side to yield

Answer: B

4. Whats the meaning of this sign?

A. a manned level crossing 50m ahead

B. an unmanned level crossing 100m ahead

C. a manned level crossing 100m ahead

D. an unmanned level crossing 50m ahead

Answer: B

5. What is this instrument?

A. speed and mileage meter

B. engine tachometer

C. top speed meter

D. fuel consumption / 100 km

Answer: A

6. When a vehicle starts to move, the driver should first turn on the low beam light.

A. Right

B. Wrong

Answer: A

7. When the vehicle has changed its direction due to a front tire blowout on the road, the driver should firmly hold the steering wheel with both hands to ensure the vehicle goes straight.

A. Right

B. Wrong

Answer: A

8. When a vehicle changes lane, the driver only needs to turn on the turn signal before rapidly entering the new lane.

A. Right

B. Wrong

Answer: B

9. When a vehicle approaches a crosswalk, the driver should ________.

A. Speed up and pass

B. Stop immediately

C. Honk to indicate the pedestrians to yield

D. Observe the movement of pedestrians and non-motorized vehicles, make sure it is safe before passing

Answer: D

10. How to pass when encountering this situation at the intersection?

A. make sure it is safe to pass

B. turn right and speed up to pass

C. speed up and pass straight

D. turn left and speed up to pass

Answer: A

11. Whats the meaning of this mark on the road?

A. the lane for non-motorized vehicles

B. the special lane for motorcycles

C. the special lane for battery bicycles

D. the special lane for bicycles

Answer: A

12. The method and direction of changing lanes by the red car is correct.

A. Right

B. Wrong

Answer: B

13. According to rules on the road traffic safety, the maximum speed on the expressway is less than 120km/hr, thus, it will not be in violation of the traffic regulations as long as the speed does not exceed 120km/hr on the expressway.

A. Right

B. Wrong

Answer: B

14. Which kind of sign is it?

A. warning sign

B. directional sign

C. indicative sign

D. prohibitive sign

Answer: A

15. Before the motorized vehicle runs on the road, the driver should check the safety and technical performance of the vehicle.

A. Right

B. Wrong

Answer: A

16. Cannot make a U turn in this section.

A. Right

B. Wrong

Answer: A

17. When driving on a mountain road covered by ice and snow, the vehicle behind should ______ if the vehicle in front is climbing a slope.

A. Climb slowly

B. Closely follow and climb

C. Select a proper place to stop and climb after the vehicle in front has passed

D. Rapidly overtake the vehicle in front

Answer: C

18. When the fire engine, ambulance and wrecker are executing an emergency task, other vehicles should yield.

A. Right

B. Wrong

Answer: A

19. Whats the meaning of this sign?

A. U turn

B. reversing

C. left turn

D. bypassing

Answer: A

20. Whats the meaning of this sign?

A. emergency shelter

B. service area

C. pedestrian passage

D. crossing road facility

Answer: A

21. The three principles for careful driving are concentration, careful observation and early prevention.

A. Right

B. Wrong

Answer: A

22. Whats the meaning of this sign?

A. embankment road

B. cliffside road

C. waterside road

D. slippery road

Answer: A

23. When a vehicle goes uphill on a mountain road, it should change to a lower gear in a timely, accurate and rapid manner so as to avoid a situation in which driving at a high gear can reduce the power of the engine.

A. Right

B. Wrong

Answer: A

24. When a vehicle on the main road approaches a conjunction with a feeder road, the driver should ______ in order to prevent a collision with a vehicle that suddenly enters from the feeder road.

A. Maintain the normal speed

B. Reduce speed in advance, observe and drive with care

C. Honk and swiftly pass

D. Speed up in advance and pass

Answer: B

25. Whats the meaning of this sign?

A. no going straight and no changing to left lane

B. no going straight and no left turn

C. allowed to go straight and change to left lane

D. no going straight and no right turn

Answer: D