宝鸡驾考英文版题库

1. When a vehicle on the main road approaches a conjunction with a feeder road, the driver should ______ in order to prevent a collision with a vehicle that suddenly enters from the feeder road.

A. Maintain the normal speed

B. Reduce speed in advance, observe and drive with care

C. Honk and swiftly pass

D. Speed up in advance and pass

Answer: B

2. The double yellow solid lines in the middle of the road are used to separate the traffic flow in opposite directions, crossing the lines to overtake or make a turn is allowed if it is safe.

A. Right

B. Wrong

Answer: B

3. What kind of violation does this car have while stopping temporarily by the roadside?

A. stop occupying the lane for motorized vehicles

B. stop more than 30cm from the roadside

C. stop in the section with no stopping marking

D. stop occupying the lane for non-motorized vehicles

Answer: C

4. A motorized vehicle is not allowed to make a U turn at the level crossing, bridge, steep slope, tunnel or dangerous road section.

A. Right

B. Wrong

Answer: A

5. How to run when encountering this situation?

A. speed up to enter the lane of either side

B. enter the right lane

C. reduce speed and enter the lane of either side

D. can not run in the lane of neither side

Answer: D

6. Which is correct when changing lane?

A. turn on the directional signal and turn left quickly

B. reduce speed properly when entering the left lane

C. cannot interfere other vehicles

D. speed up to enter the left lane

Answer: C

7. A motorized vehicle driver is not allowed during the period of probation to pull a trailer.

A. Right

B. Wrong

Answer: A

8. What causes the rear-end collision?

A. not observe through the rear-view mirror while the vehicle in front brakes

B. the vehicle in front brakes suddenly

C. distance from the vehicle in front is too close when the rear vehicle overtakes

D. not maintain a safe distance from the vehicle in front

Answer: D

9. The validity of the driving license which is initially applied for is 6 years.

A. Right

B. Wrong

Answer: A

10. Whats the meaning of this sign?

A. going straight and right turn

B. going straight and left turn

C. no going straight and no left turn

D. right turn and left turn only

Answer: B

11. What device does the switch of this symbol control?

A. the windscreen defrosting or defogging

B. the rear window wiper and washer

C. the windscreen wiper and washer

D. the rear window defrosting or defogging

Answer: C

12. Whats the meaning of this guide arrow?

A. indicate turning left or making a U turn ahead

B. indicate going straight or turning left ahead

C. indicate going straight or changing to left lane ahead

D. indicate going straight or making a U turn ahead

Answer: D

13. Whats the meaning of this sign?

A. max speed

B. speed limit

C. speed recommended

D. mini speed

Answer: C

14. Whats the meaning of this sign?

A. reducing speed 40m ahead

B. minimum speed is 40km/hr

C. axle weight limit is 40 tons

D. maximum speed limit is 40km/hr

Answer: D

15. It lights to indicate that ______

A. left-turn signal flashes

B. front and rear width lights light on

C. front and rear width lights light on

D. right-turn signal flashes

Answer: A

16. When driving a vehicle on the road, the driver should drive safely at the prescribed speed.

A. Right

B. Wrong

Answer: A

17. When a vehicle has increased its speed to more than 60 kilometers per hour on the ramp of an expressway, it may directly enter the carriageway.

A. Right

B. Wrong

Answer: B

18. When encountering slow-moving vehicles at an intersection that has no traffic signals, the motorized vehicle should pass alternately.

A. Right

B. Wrong

Answer: A

19. When passing a section of a mountain road which is prone to landside and mudflow, the driver should not stop.

A. Right

B. Wrong

Answer: A

20. When a motorized vehicle stops temporarily at the roadside, the driver ________.

A. Is not allowed to stop in the opposite direction or in parallel

B. May stop anyway he likes as long as it is convenient for him to get out

C. May stop the vehicle in the opposite direction

D. May stop the vehicle in parallel

Answer: A

21. It lights to indicate that ______

A. the tail fog light is turned on

B. the low beam light is turned on

C. the high beam light is turned on

D. the head fog light is turned on

Answer: B

22. It lights to indicate enabling the floor and the front windscreen fan.

A. Right

B. Wrong

Answer: A

23. How to use light in this situation at the intersection?

A. turn off high beam lights

B. use hazard lights

C. use the high and low beam lights alternately

D. use high beam lights

Answer: C

24. A motorized vehicle driver who uses other motorized vehicles license plate and vehicle license is subject to a 3-point penalty.

A. Right

B. Wrong

Answer: B

25. Whats the meaning of this sign?

A. crosswalk lights

B. watch for pedestrians

C. attention to traffic lights

D. intersection

Answer: C