毫州Chinese Driving License Test

1. The seat belts can reduce the injury of the driver and passengers when there is a collision.

A. Right

B. Wrong

Answer: A

2. You may not use the turn signal when you change to the right lane.

A. Right

B. Wrong

Answer: B

3. When a following vehicle gives the overtaking signal, the driver should ________ if conditions permit.

A. Move to the right side and speed up

B. Voluntarily reduce speed and drive along the right side

C. Yield a proper space and speed up

D. Reduce speed rapidly or apply an emergency braking

Answer: B

4. Whats the meaning of this sign?

A. minimum speed limit is 50km/hr

B. maximum speed limit is 50km/hr

C. the height is 50m

D. the altitude is 50m

Answer: A

5. It lights to indicate that ______

A. the tail fog light is turned on

B. the low beam light is turned on

C. the high beam light is turned on

D. the head fog light is turned on

Answer: B

6. Which part does this switch control?

A. windscreen defogger

B. windscreen wiper

C. the hazard lights

D. devices of lights and signals

Answer: B

7. When driving a motorized vehicle uphill, you should speed up and honk when you going to reach the top of the slope.

A. Right

B. Wrong

Answer: B

8. When reaching an intersection, the driver should _____ if a turning vehicle cuts in.

A. Stop to evade

B. Maintain the normal speed

C. Speed up and pass ahead of it

D. Honk and pass ahead of it

Answer: A

9. What causes the rear-end collision?

A. not observe through the rear-view mirror while the vehicle in front brakes

B. the vehicle in front brakes suddenly

C. distance from the vehicle in front is too close when the rear vehicle overtakes

D. not maintain a safe distance from the vehicle in front

Answer: D

10. When running on the road having maximum speed limit signs, the motorized vehicle is not allowed to exceed the marked maximum speed.

A. Right

B. Wrong

Answer: A

11. Pass the crossing as fast as possible if there is a red light at the intersection of a road or a level crossing.

A. Right

B. Wrong

Answer: B

12. Whats the meaning of this sign?

A. expressway exit

B. expressway beginning

C. expressway entry

D. expressway ending

Answer: B

13. A motorized vehicle driver who uses falsified or altered driving license is subject to a 12-point penalty.

A. Right

B. Wrong

Answer: A

14. When a vehicle goes uphill, the driver should observe the road conditions and the length of the slope in advance and shift to the lower gear in a timely manner to ensure the vehicle has sufficient power.

A. Right

B. Wrong

Answer: A

15. Whats the meaning of this sign?

A. watch for danger

B. bypass from right side

C. bypass from left side

D. one-way pass

Answer: C

16. Whats the meaning of this sign?

A. electric bicycles may go

B. parking space for non-motorized vehicles

C. parking area for non-motorized vehicles

D. non-motorized vehicles may go

Answer: D

17. A motorized vehicle can make a U turn on this road as long as it does not interfere other vehicles.

A. Right

B. Wrong

Answer: A

18. Whats the meaning of the white solid line in the middle of the road?

A. unilateral same direction lanes dividing line that can be crossed

B. same direction lanes dividing line that can not be crossed

C. bilateral same direction lanes dividing line that can be crossed

D. opposite direction lanes dividing line that can not be crossed

Answer: B

19. A motorized vehicle driver who uses falsified and altered vehicle license is subject to a ________.

A. 6-point penalty

B. 3-point penalty

C. 2-point penalty

D. 12-point penalty

Answer: D

20. It flashes when turning on the hazard lights.

A. Right

B. Wrong

Answer: A

21. If a person who has caused a major traffic accident and if his act constitutes a crime, he may not be held for criminal liabilities.

A. Right

B. Wrong

Answer: B

22. This sign reminds serious bump road ahead.

A. Right

B. Wrong

Answer: B

23. 7.When a vehicle changes lane before an intersection, the driver should do so ______.

A. In the area marked by solid lines before the intersection

B. In the area marked by solid lines in the intersection

C. In the area marked by broken lines as indicated by the guide arrow

D. Before the stop line at the intersection

Answer: C

24. What does this symbol indicate?

A. switch of high beam lights

B. switch of the low beam lights

C. master switch of vehicle lights

D. the switch of tail fog light

Answer: C

25. When a vehicle on the main road approaches a conjunction with a feeder road, the driver should ______ in order to prevent a collision with a vehicle that suddenly enters from the feeder road.

A. Maintain the normal speed

B. Reduce speed in advance, observe and drive with care

C. Honk and swiftly pass

D. Speed up in advance and pass

Answer: B