宜昌Chinese Driving License Test

1. Whats the meaning of the white markings on the road?

A. road construction marking

B. horizontal deceleration marking

C. vertical deceleration marking

D. fewer lanes indication marking

Answer: B

2. How to use lights when pulling over on road?

A. turn on the hazard lights

B. turn on the right-turn signal in advance

C. use the high and low beam lights alternately

D. not need to use any light to indicate

Answer: B

3. What is this manipulation device?

A. switch of the turn signal

B. switch of the head lights

C. switch of wiper

D. switch of defogger

Answer: D

4. When the road maintenance vehicle and the engineering vehicle are on duty, the passing vehicles should avoid with care.

A. Right

B. Wrong

Answer: A

5. This sign reminds the lane or the road narrows on both sides ahead.

A. Right

B. Wrong

Answer: B

6. You can drive directly into the expressway from this position.

A. Right

B. Wrong

Answer: B

7. Whats the meaning of this sign?

A. expressway public phone

B. expressway police phone

C. expressway emergency phone

D. expressway rescue phone

Answer: C

8. Within how long should a driver whose information has changed apply for new license?

A. 30 days

B. 40 days

C. 50 days

D. 60 days

Answer: A

9. The continuously flashing yellow light means that the vehicle may speed up and pass.

A. Right

B. Wrong

Answer: B

10. A driver can park the vehicle by borrowing the sidewalk if he cannot find the parking area.

A. Right

B. Wrong

Answer: B

11. Whats the meaning of this sign?

A. school area

B. watch for children

C. crosswalk

D. watch for pedestrians

Answer: B

12. The yellow lane-dividing line on the road is used to _____

A. allow to drive in left lane

B. separate the traffic flow in opposite directions

C. separate the traffic flow in the same direction

D. prohibit to cross the opposite lane

Answer: B

13. How to run at this position when leaving the expressway?

A. enter the deceleration lane

B. keep running forward

C. keep the speed at 100km/hr

D. reduce the speed to less than 40km/hr

Answer: A

14. When a vehicle reaches a muddy or burst-and-muddy section, the driver should stop,observe and select the level and solid section or the section with vehicle tracks.

A. Right

B. Wrong

Answer: A

15. Before a motorized vehicle overtakes, the driver should turn on the left-turn signal, use the high and low beam lights alternately or honk in advance.

A. Right

B. Wrong

Answer: A

16. When encountering stopping in turn or slow-moving vehicles in front at an intersection where lanes are reduced, the motorized vehicle should _________.

A. enter the intersection from road shoulder by the right side of the vehicle in front

B. enter the intersection from the side of interspace

C. pass alternately with one vehicle each lane to enter the intersection

D. change to left lane and cut in to enter the intersection

Answer: C

17. When a motorized vehicle encounters the cut in by another vehicle in a roundabout, the driver may not evade as long as he has the right of way.

A. Right

B. Wrong

Answer: B

18. Whats the meaning of this sign?

A. indication of the place name of the expressway ending

B. indication of the driving route of the expressway

C. indication of the driving direction of the expressway

D. indication of the location and distance of the expressway

Answer: D

19. The braking system may malfunction if it lights.

A. Right

B. Wrong

Answer: A

20. What marking is the combination of the white broken lines and the triangle area?

A. road entry marking

B. lane-dividing line that can be crossed

C. deceleration line at road entry

D. road exit marking

Answer: A

21. How to run on this road?

A. run in the middle of the road

B. run on both side of the road

C. run according to lanes

D. go forward at will

Answer: A

22. Whats the meaning of this sign?

A. steep downhill road

B. continuous up slopes

C. steep uphill road

D. embankment road

Answer: C

23. The driver is prohibited from opening the door and letting passengers on and off when a vehicle has not come to a full stop.

A. Right

B. Wrong

Answer: A

24. What device does the switch of this symbol control?

A. the windscreen wiper and washer

B. the rear window defrosting or defogging

C. the rear window wiper and washer

D. the windscreen defrosting or defogging

Answer: C

25. Traffic markings are divided into indication, warning and prohibition.

A. Right

B. Wrong

Answer: A