海口英文驾考科目四资料

1. In the condition of low visibility, drivers should turn on the low-beam when setting off

A. Right

B. Wrong

Answer: A

2. Under such circumstances, what should motor vehicle drivers do?

A. Pass slowly at a lower speed

B. Speed up and pass

C. Continuously sound the horn and pass

D. Pass at a normal speed

Answer: A

3. The sign on the right indicates a passing bay ahead.

A. Right

B. Wrong

Answer: A

4. Sideslip happens most easily on which one of the following road surfaces?

A. Dry concrete road

B. Road surface at the beginning of rain

C. Damp concrete road surface

D. Road in heavy rain

Answer: B

5. When driving on a road covered with ice and snow, drivers tend to encounter glare caused by reflection of light rays from the road surface.

A. Right

B. Wrong

Answer: A

6. When the electric equipment and gasoline of a motor vehicle catches fire, the driver may extinguish the fire with water.

A. Right

B. Wrong

Answer: B

7. The main impact of muddy roads on safe driving is that the wheels may easily spin and skid

A. Right

B. Wrong

Answer: A

8. How to ensure safe driving at night?

A. Drive at speed limit

B. Cut speed and drive carefully

C. Maintain the current speed

D. Drive above the speed limit

Answer: B

9. When encountering such pedestrians while driving, a longer safety distance should be kept by drivers.

A. Right

B. Wrong

Answer: A

10. The right-front sign indicates a time-regulated pedestrian area.

A. Right

B. Wrong

Answer: A

11. When driving on an expressway in rain, the driver should slow down to avoid steering failure arising from water slide

A. Right

B. Wrong

Answer: A

12. How to pass the intersection when running straight

A. turn on the hazard lights and pass

B. directly speed up and pass straight

C. yield to the vehicle from the right road

D. yield to the vehicle from the left road

Answer: C

13. When a collision occurs on the passenger seat side or the impact is relatively small, which of the following methods is incorrect?

A. Firmly holding the steering wheel

B. Stretching both feet forward

C. Jumping out of the vehicle from one side

D. Leaning body backwards against the seat

Answer: C

14. What should the driver do when seeing these hand signals?

A. Go straight and pass through the intersection

B. Stop and wait

C. Turn right at the intersection

D. Turn left at the intersection

Answer: B

15. The broken white line rectangle area on the right side of the road indicates that long stopping is permitted here.

A. Right

B. Wrong

Answer: B

16. The broken white reflective line on the road warns that drivers should drive at a lower speed on the road section ahead.

A. Right

B. Wrong

Answer: A

17. The sign on the right indicates an inspection station 100 meters ahead.

A. Right

B. Wrong

Answer: A

18. Turning on the high-beam is an effective way to improve visibility in fog weather.

A. Right

B. Wrong

Answer: B

19. When there is a braking failure on a downhill road the driver should change the gear to one position or two positions lower, and control the speed by taking advantage of the braking role of the engine.

A. Right

B. Wrong

Answer: A

20. What should the driver do upon seeing this sign?

A. Slow down, look and pass slowly

B. Sound the horn to drive them away

C. Go through from the spaces between animals

D. Drive slowly and drive them away from the motor vehicle

Answer: A

21. What should the driver pay attention to in this situation?

A. Pedestrians passing behind the vehicle

B. Pedestrians passing in front of the vehicle

C. Public buses suddenly reversing

D. Public buses suddenly setting off

Answer: B

22. Which of the following measures is incorrect when a motor vehicle stops?

A. Stop at a stipulated place

B. Avoid stopping on pedestrian streets

C. Avoid obstructing the passing of other motor vehicles and pedestrians when temporarily stops on the road

D. Stop on the non-motor vehicle lane

Answer: D

23. The sign in front indicates the allocation of roads ahead.

A. Right

B. Wrong

Answer: B

24. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D

25. Motor vehicles should accelerate when driving into an intersection with this traffic signal.

A. Right

B. Wrong

Answer: B