贵州驾考科目四英文版题库

1. What is the function of ABS during emergency braking?

A. Shortening the braking distance

B. Keeping steering capacity of the motor vehicle

C. Relief the braking inertia

D. Controlling directions automatically

Answer: B

2. Under such circumstances, motor vehicle drivers should stop and yield

A. Right

B. Wrong

Answer: A

3. Drivers are not allowed to cross these lane-dividing lines when overtaking in the same direction.

A. Right

B. Wrong

Answer: A

4. When there is bleeding at the bone fracture of a wounded person, the first thing to do is to fix the wounded part in position, then stop the bleeding and dress the wound.

A. Right

B. Wrong

Answer: B

5. When encountering such a situation, the motor vehicle driver should change to the left lane rapidly.

A. Right

B. Wrong

Answer: B

6. This road marker indicates that the minimum speed for this road section is 60 km/hour.

A. Right

B. Wrong

Answer: B

7. When a fast-moving vehicle encounters an emergency the driver should turn to evade first and then brake to slow down so as to mitigate the damage.

A. Right

B. Wrong

Answer: B

8. When a motor vehicle needs to stop for inspection after having an accident on an expressway, where should the driver park?

A. On the far outer lane

B. On the inner lane

C. On the emergency lane

D. In the triangle area on the ramp

Answer: C

9. How should lamps be used when setting off in this situation?

A. Turn on the high-beam

B. Turn on the left indicator only

C. Turn on the left indicator and low-beam

D. Turn on hazard lamp

Answer: C

10. How should the driver use vehicle lights when the motor vehicle enters this intersection?

A. Turn on the right-turn indicator

B. Turn on the hazard lamps

C. No need to turn on any indicators

D. Turn on the left indicator

Answer: C

11. Under the circumstances shown in the flash, what should be done by the vehicle in front?

A. Reduce speed swiftly or apply emergency brake

B. Drive at a higher speed after giving a proper space

C. Reduce speed and yield by the right side of the road

D. Drive at a higher speed by the right side of the road

Answer: C

12. How to ensure motor vehicles have sufficient power when driving uphill?

A. Downshift before reducing speed

B. Downshift after reducing speed

C. Downshift when the speed is excessively low

D. Downshift to the fullest extent

Answer: A

13. This sign warns that the section ahead is under traffic monitoring.

A. Right

B. Wrong

Answer: A

14. The sign in front is an advance announcement of famous places and distances en route.

A. Right

B. Wrong

Answer: A

15. Which of the following measures is incorrect when a motor vehicle stops?

A. Stop at a stipulated place

B. Avoid stopping on pedestrian streets

C. Avoid obstructing the passing of other motor vehicles and pedestrians when temporarily stops on the road

D. Stop on the non-motor vehicle lane

Answer: D

16. The sign on the right warns of an unguarded railway crossing 150 meters ahead.

A. Right

B. Wrong

Answer: A

17. The broken white reflective line on the road warns that drivers should drive at a lower speed on the road section ahead.

A. Right

B. Wrong

Answer: A

18. When a bicycle borrows the motor vehicle lane, the motor vehicle may sound the horn hurriedly to warn the bicycle to yield.

A. Right

B. Wrong

Answer: B

19. Before driving, it is necessary to check whether the cooling liquid, engine oil and fuel oil, are leaking.

A. Right

B. Wrong

Answer: A

20. As shown in this picture, the vehicles intending to turn left are not allowed to drive into left-turn waiting area directly to wait for green light.

A. Right

B. Wrong

Answer: B

21. The guide arrow on the road surface of this lane indicates that only left turns are permitted at the intersection ahead.

A. Right

B. Wrong

Answer: A

22. The sign on the right indicates that vehicles from the primary road have priority.

A. Right

B. Wrong

Answer: A

23. When there is a sudden braking failure on a downhill road, what should be done by the driver?

A. Driving to an emergency lane and reducing speed to stop

B. Dropping the gear by two positions

C. Changing to the reverse gear to force the vehicle to stop

D. Reducing speed by pulling up the handbrake

Answer: A

24. Drivers are allowed to cross the broken and solid white line on the road when changing lanes or pulling over.

A. Right

B. Wrong

Answer: A

25. Which one of the following measures is correct when a motor vehicle intends to overtake but the vehicle in front refuses to yield?

A. Use a long-sounding horn

B. Follow the vehicle in front while turning high-beam

C. Wait for it to yield while keeping a safe distance

D. Use high-beam and low-beam alternatively

Answer: C