汕头驾校模拟考试科目一英文版

1. After a vehicle enters a mountain road, it should pay special attention to the continuous curves sign. In addition, it should voluntarily evade vehicles and pedestrians, reduce speed in a time manner and honk in advance.

A. Right

B. Wrong

Answer: A

2. Speeding up to go though the intersection before the light turns to red in this case.

A. Right

B. Wrong

Answer: B

3. What does this sign mean?

A. Reminding the side of a reservoir, lake or river ahead

B. Reminding the steep uphill road ahead

C. Reminding the steep downhill road ahead

D. Reminding continuous two or more up slopes ahead

Answer: C

4. What is this manipulation device?

A. the air throttle lever

B. the gear lever

C. the clutch lever

D. the handbrake

Answer: D

5. If a front tire blowout has caused a turn in direction, the driver should not avoid excess adjustment. Instead, he should control the direction of the vehicle, ____, and slowly reduce the speed of the vehicle.

A. Apply emergency braking

B. Use the handbrake

C. Gently depress the brake pedal

D. Swiftly depress the brake pedal

Answer: C

6. What is this traffic sign?

A. Road narrows on both sides

B. Road narrows on the right side

C. Road narrows on the left side

D. Bridge narrows

Answer: A

7. The rear windshield defroster starts to work after pressing this switch.

A. Right

B. Wrong

Answer: B

8. When driving in icy and snowy weather, the vehicle steadiness decreases and sudden acceleration can very easily cause spins and slides.

A. Right

B. Wrong

Answer: A

9. Speed up when passing the overflowing road.

A. Right

B. Wrong

Answer: B

10. Whats the meaning of this sign?

A. township road No.

B. county road No.

C. provincial highway No.

D. national highway No.

Answer: D

11. Whats the meaning of the white horizontal solid line in the circle?

A. turning waiting line

B. deceleration line

C. yielding line

D. stop line

Answer: D

12. Traffic markings are divided into indication, warning and prohibition.

A. Right

B. Wrong

Answer: A

13. What marking are the white serrated solid lines in the circle?

A. guide lane lines

B. direction guide line

C. variable guide lane line

D. one-way driving line

Answer: C

14. The age should be 18 ~ 70 years old when applying for the driving license of small vehicle or three-wheeled automobile.

A. Right

B. Wrong

Answer: A

15. It lights to indicate enabling the floor and the front windscreen fan.

A. Right

B. Wrong

Answer: A

16. The continuously flashing yellow light means that the vehicle may speed up and pass.

A. Right

B. Wrong

Answer: B

17. Max speed when pass the narrow road or bridge is _______

A. 50km/hr

B. 40km/hr

C. 30km/hr

D. 60km/hr

Answer: C

18. Whats the meaning of this sign?

A. lane for both going straight and U turn

B. lane for both going straight and left turn

C. lane for going straight and right turn

D. lanes for going in different directions

Answer: B

19. This sign reminds the road in front changes to inseparate two ways section.

A. Right

B. Wrong

Answer: A

20. How to pass this intersection?

A. not reduce speed to pass

B. speed up to pass as soon as possible

C. slide over in the neutral gear

D. reduce speed or stop to observe

Answer: D

21. If a motorized vehicle driver reaches 12 penalty points during the period of probation, the probation qualification should be revoked.

A. Right

B. Wrong

Answer: A

22. You have the priviledged passing right of way at the intersection in this situation.

A. Right

B. Wrong

Answer: B

23. Whats the meaning of this guide arrow?

A. going straight and U turn are allowed ahead

B. left turn and U turn are allowed ahead

C. going straight and changing to left lane are allowed ahead

D. going straight and left turn are allowed ahead

Answer: B

24. When the road maintenance vehicle and the engineering vehicle are on duty, the passing vehicles should avoid with care.

A. Right

B. Wrong

Answer: A

25. What marking is the white polylines in the circle?

A. ascertaining the distance between the vehicles

B. driving at reduced speed

C. ascertaining the speed of the vehicles

D. reducing the speed at the intersection

Answer: A