六安2026科目四考试英文

1. What does this sign on the fly-over junction indicate?

A. Turn right

B. Drive straight or turn left

C. Drive straight or turn right

D. Take a U-turn under bridge

Answer: B

2. Drivers are allowed to cross the broken and solid white line on the road when changing lanes or pulling over.

A. Right

B. Wrong

Answer: A

3. The sign indicates no overtaking on the section ahead.

A. Right

B. Wrong

Answer: B

4. When seeing this sign, the driver should slow down promptly.

A. Right

B. Wrong

Answer: A

5. When a motor vehicle catches fire on the expressway the driver should drive the motor vehicle to the service area or the parking lot to extinguish the fire.

A. Right

B. Wrong

Answer: B

6. Dangerous chemicals possess the characteristics of explosion, inflammation, poison, erosion and radiation.

A. Right

B. Wrong

Answer: A

7. The sign on the right indicates to stop and yield at the intersection ahead.

A. Right

B. Wrong

Answer: A

8. The white solid line on the right side of the road indicates the boundary of a driving lane and crosswalk.

A. Right

B. Wrong

Answer: B

9. How many kinds of law-breaking acts are displayed in flash 1?

A. One

B. Two

C. Three

D. Four

Answer: B

10. The sign on the right warns of a guarded railway crossing 100 meters ahead.

A. Right

B. Wrong

Answer: B

11. As shown in this picture, before driving to the intersection, vehicles are not allowed to change lanes by crossing the solid white line.

A. Right

B. Wrong

Answer: A

12. Drivers are not allowed to drive on or across these filled-in slanted yellow lines.

A. Right

B. Wrong

Answer: A

13. The sign in front is an advance announcement of the directions led by the interchange.

A. Right

B. Wrong

Answer: A

14. When the engine suddenly stalls on the road, what should the driver do?

A. Stop the vehicle and overhaul it immediately

B. Immediately turn on the hazard lamps

C. Move the vehicle to a place where it will not obstruct the traffic flow

D. Set up a breakdown warning sign

Answer: BCD

15. The guide arrow on the road surface of this lane indicates that only left turns are permitted at the intersection ahead.

A. Right

B. Wrong

Answer: A

16. Which one of the following is a safe way for motor vehicles to converge into an intersection marked with this sign?

A. Speeding up and driving into the traffic flow directly

B. Driving into the traffic flow behind the gray car on the main road

C. Driving into the traffic flow from the front of the red car on the main road

D. Turning on the indicator and driving into the flow directly

Answer: B

17. Drivers may temporarily cross these central solid double yellow lines when overtaking.

A. Right

B. Wrong

Answer: B

18. Under this circumstance, motor vehicle drivers should give the right of way to oncoming vehicle.

A. Right

B. Wrong

Answer: A

19. When a motor vehicle passes over an inundated road drivers should change to a high gear and pass rapidly.

A. Right

B. Wrong

Answer: B

20. When steering failure happens to a fast moving motor vehicle, what should the driver do?

A. Apply emergency braking

B. Immediately change to a low gear

C. Reasonably use the driving brake and the stopping brake and refrain from applying emergency braking

D. Turn on the hazard lamps

Answer: BCD

21. Which is the correct way to use a fire extinguisher?

A. Stand on the leeward side

B. Direct the fire extinguisher at the source of fire

C. Try to approach the source of fire as close as possible

D. Direct the fire extinguisher at the flames

Answer: B

22. As shown in the flash, the driver’s act is correct.

A. Right

B. Wrong

Answer: B

23. When driving on a foggy day, the driver should turn on the fog lamp.

A. Right

B. Wrong

Answer: A

24. What should a motor vehicle driver do to ensure safety when experiencing a breakdown at night?

A. Park in a safe place

B. Turn on hazard lamp

C. Turn on clearance lamp and tail lamp

D. Set up a warning sign in accordance with regulation

Answer: ABCD

25. When encountering this situation, which of the following is the correct way to overtake other vehicles?

A. Turn on high-beam

B. Use high-beam and low-beam alternatively

C. Turn on low-beam

D. Turning on hazard lamp

Answer: B