合肥科目一考试英文版

1. This sign warns slippery road ahead and running slowly with care.

A. Right

B. Wrong

Answer: B

2. What does this symbol indicate?

A. snowy starting mode

B. air circulation

C. air condition cooling mode

D. cooling or warming fan

Answer: D

3. A motorized vehicle driver who drives the vehicle which permission is different is subject to a ________.

A. 2-point penalty

B. 3-point penalty

C. 6-point penalty

D. 12-point penalty

Answer: D

4. In which situation cannot overtake a vehicle in front?

A. vehicle in front is reducing speed to yield

B. vehicle in front is turning left

C. vehicle in front is pulling over by the roadside

D. vehicle in front is turning right

Answer: B

5. How to run when seeing this traffic light at level crossing?

A. pass before the train comes

B. no exceeding the stop line

C. observe and pass slowly

D. speed up and pass without changing gear

Answer: B

6. Whats the meaning of this sign?

A. flat intersection

B. flat ring intersection

C. attention to interactive intersection

D. attention to separate intersection

Answer: D

7. When a vehicle starts to move, the driver should first turn on the low beam light.

A. Right

B. Wrong

Answer: A

8. The method and direction of changing lanes by the red car is correct.

A. Right

B. Wrong

Answer: B

9. A driver may drive on the road a motorized vehicle overhauled which has reached the scraped standard.

A. Right

B. Wrong

Answer: B

10. When a motorized vehicle returns to the original lane after overtaking, the driver should turn on the right-turn signal.

A. Right

B. Wrong

Answer: A

11. Whats the meaning of this sign?

A. expressway left exit ahead

B. expressway destination ahead

C. expressway right exit ahead

D. expressway next exit ahead

Answer: D

12. How to pass this intersection?

A. keep the speed and go through

B. honk to urge

C. reduce speed and go through slowly

D. speed up and go through

Answer: C

13. It lights to remind that the driver‘s seat is not adjusted properly.

A. Right

B. Wrong

Answer: B

14. The wrong measure to avoid tire blowout is to _________.

A. Reduce tire pressure

B. Check the tires regularly

C. Remove objects from tire tread grooves in a timely manner

D. Replace the tire that has cracks or deep cuts

Answer: A

15. If the vehicle has no license plate, label of inspection or label of insurance, preserve the scene and immediately report to the police.

A. Right

B. Wrong

Answer: A

16. Pass the crossing as fast as possible if there is a red light at the intersection of a road or a level crossing.

A. Right

B. Wrong

Answer: B

17. May turn right when encountering this traffic light at the intersection.

A. Right

B. Wrong

Answer: A

18. This set of the hand signals of the traffic police indicates that the vehicles should ____ .

A. turn right

B. change lane

C. reduce speed and pass slowly

D. pull over

Answer: C

19. When a vehicle goes down a long slope, it should run at a lower gear and fully use the engine to brake.

A. Right

B. Wrong

Answer: A

20. If a front tire blowout has caused a turn in direction, the driver should not avoid excess adjustment. Instead, he should control the direction of the vehicle, ____, and slowly reduce the speed of the vehicle.

A. Apply emergency braking

B. Use the handbrake

C. Gently depress the brake pedal

D. Swiftly depress the brake pedal

Answer: C

21. May turn right in this situation.

A. Right

B. Wrong

Answer: B

22. When a motorized vehicle encounters the cut in by another vehicle in a roundabout, the driver may not evade as long as he has the right of way.

A. Right

B. Wrong

Answer: B

23. Whats the meaning of this sign?

A. an unmanned level crossing 100m ahead

B. a manned level crossing 100m ahead

C. an unmanned level crossing 50m ahead

D. a manned level crossing 50m ahead

Answer: C

24. How to run at this position when leaving the expressway?

A. enter the deceleration lane

B. keep running forward

C. keep the speed at 100km/hr

D. reduce the speed to less than 40km/hr

Answer: A

25. What mark is the inclined yellow and black lines?

A. entity mark

B. protrusions mark

C. three-dimensional mark

D. deceleration mark

Answer: C