伊犁英文驾照科目一考试

1. Whats the meaning of this sign?

A. 3.5m width limit

B. 3.5m width limit ban is lifted

C. 3.5m distance from vehicles limit

D. 3.5m height limit

Answer: D

2. A motorized vehicle driver who uses falsified or altered driving license is subject to a 12-point penalty.

A. Right

B. Wrong

Answer: A

3. Whats the meaning of the white horizontal solid line in the circle?

A. turning waiting line

B. deceleration line

C. yielding line

D. stop line

Answer: D

4. Whats the meaning of this park marking?

A. special stopping and waiting area

B. special getting-on and getting-off area

C. time limit parking

D. fixed direction parking

Answer: D

5. When encountering an overflowing bridge, the driver should look at the situation, and passes through slowly before he makes sure that it is safe to do so.

A. Right

B. Wrong

Answer: A

6. Whats the meaning of the double yellow solid lines?

A. opposite direction lanes dividing line that can not be crossed

B. opposite direction lanes dividing line that can be crossed

C. bilateral same direction lanes dividing line that can be crossed

D. one-way lanes dividing line

Answer: A

7. Whats the meaning of this sign?

A. no changing lane

B. no left turn

C. no going straight

D. no U turn

Answer: D

8. Driving a motorized vehicle on the expressway is not allowed to exceed the marked maximum speed.

A. Right

B. Wrong

Answer: A

9. What does this symbol indicate?

A. snowy starting mode

B. air circulation

C. air condition cooling mode

D. cooling or warming fan

Answer: D

10. Whats the meaning of this sign?

A. danger-avoiding lane

B. emergency lane

C. road shoulder

D. sharp curve

Answer: A

11. When crossing each other at night, how far should change the high beam lights to low beam lights?

A. not need to change lights

B. beyond 150m

C. within 100m

D. within 50m

Answer: B

12. How to use lights when overtaking at night?

A. turn off the high beam light

B. turn on high beam lights

C. use fog lights

D. using the high and low beam lights alternately

Answer: D

13. A motorized vehicle can make a U turn on this road as long as it does not interfere other vehicles.

A. Right

B. Wrong

Answer: A

14. What marking is the white polylines in the circle?

A. ascertaining the distance between the vehicles

B. driving at reduced speed

C. ascertaining the speed of the vehicles

D. reducing the speed at the intersection

Answer: A

15. When a vehicle passes a bumped road, the driver should ________.

A. Speed up and dash over under inertia

B. Change to the neutral gear and slide over

C. Maintain the original speed and pass

D. Pass slowly and steadily

Answer: D

16. Driving a motorized vehicle on the road should be required to be with a license plate.

A. Right

B. Wrong

Answer: A

17. It lights continuously to indicate that engine control system failed.

A. Right

B. Wrong

Answer: A

18. How to use lights at night while crossing each other on narrow road or bridge?

A. turn off all the lights

B. turn on the low beam lights

C. turn off the head lights

D. turn on high beam lights

Answer: B

19. The light switch is in this position, front fog lights turn on

A. Right

B. Wrong

Answer: A

20. Whats the meaning of this sign?

A. watch for two-way road

B. driving by either side of the road

C. watch for variable lane

D. variable lane

Answer: C

21. After a vehicle enters the ramp, the driver should swiftly increase the speed to more than 60 kilometers per hour.

A. Right

B. Wrong

Answer: B

22. Whats the meaning of this sign?

A. embankment road

B. cliffside road

C. waterside road

D. slippery road

Answer: A

23. Whats the meaning of this sign?

A. line guide signs

B. lane merging guide signs

C. lane branching guide signs

D. turning guide signs

Answer: A

24. When ignition switch is in the START position, the starter starts.

A. Right

B. Wrong

Answer: A

25. Turn on the left-turn signal in advance when making a U turn on the road.

A. Right

B. Wrong

Answer: A