梅州驾考科目一英文版

1. When driving in thick or extremely thick fog, the driver should ____ due to low visibility.

A. Turn on the head light and keep driving

B. Turn on the contour light, fog light and drive along the right side

C. Turn on the hazard lights and keep driving

D. Turn on the hazard lights, fog light, and stop at a safe place

Answer: D

2. When the vehicle has changed its direction due to a front tire blowout on the road, the driver should firmly hold the steering wheel with both hands to ensure the vehicle goes straight.

A. Right

B. Wrong

Answer: A

3. The driving license will not be revoked if the person drives after drug taking and injection.

A. Right

B. Wrong

Answer: B

4. Which part does it control when rotating this part of the switch?

A. the low beam lights

B. the head and tail fog lights

C. high beam lights

D. turn signals

Answer: B

5. No turning right at the intersection ahead.

A. Right

B. Wrong

Answer: B

6. Whats the meaning of this sign?

A. expressway mileage No.

B. expressway border plate No.

C. expressway name No.

D. expressway section No.

Answer: C

7. It lights to remind that the driver has not buckled up.

A. Right

B. Wrong

Answer: A

8. How to do while entering this intersection?

A. shift the high and low beam lights alternately to remind the cars already in the intersection to yield

B. quickly cut in the cars already in the intersection

C. let the cars already in the intersection go first

D. honk and enter directly

Answer: C

9. How long is the period of probation after a motorized vehicle driver obtains his driving license for the first time or the permission to drive higher level vehicles.

A. 6 months

B. 12 months

C. 2 years

D. 3 months

Answer: B

10. How to pass when encountering this situation at the intersection?

A. make sure it is safe to pass

B. turn right and speed up to pass

C. speed up and pass straight

D. turn left and speed up to pass

Answer: A

11. What device does the switch of this symbol control?

A. the windscreen wiper and washer

B. the rear window defrosting or defogging

C. the rear window wiper and washer

D. the windscreen defrosting or defogging

Answer: C

12. What device does the switch of this symbol control?

A. child safety lock

B. window glasses of both sides

C. electric door

D. door unlock

Answer: A

13. How to pass through the unmanned level crossing without traffic lights?

A. properly reduce speed to pass

B. slide over in the neutral gear

C. stop to make sure it is safe, then pass

D. speed up and pass as fast as possible

Answer: C

14. When a vehicle has increased its speed to more than 60 kilometers per hour on the ramp of an expressway, it may directly enter the carriageway.

A. Right

B. Wrong

Answer: B

15. In such road sections, you can enter the cross-hatched marking area to wait.

A. Right

B. Wrong

Answer: B

16. How long can a driver drives without rest?

A. less than 6hrs

B. less than 8hrs

C. less than 10hrs

D. less than 4hrs

Answer: D

17. When an accident has caused congestion on an expressway, the vehicles may run in the emergency strip on the right or in the shoulder of the road.

A. Right

B. Wrong

Answer: B

18. When a driver drives a motorized vehicle during the period of probation, the driver should paste or hang a uniform probation mark on the rear part of the vehicle.

A. Right

B. Wrong

Answer: A

19. What marking is the triagle filled area in the circle?

A. stop line

B. deceleration line

C. guide line

D. cross-hatched marking

Answer: C

20. After causing a road accident, the vehicle driver needs to change the scene for rescuing the wounded, the driver should mark the location.

A. Right

B. Wrong

Answer: A

21. When a following vehicle gives the overtaking signal, the driver should ________ if conditions permit.

A. Move to the right side and speed up

B. Voluntarily reduce speed and drive along the right side

C. Yield a proper space and speed up

D. Reduce speed rapidly or apply an emergency braking

Answer: B

22. Whats the meaning of the white markings on the road?

A. road construction marking

B. horizontal deceleration marking

C. vertical deceleration marking

D. fewer lanes indication marking

Answer: B

23. What marking are the white serrated solid lines in the circle?

A. guide lane lines

B. direction guide line

C. variable guide lane line

D. one-way driving line

Answer: C

24. Whats the meaning of this guide arrow?

A. indicate changing to left lane

B. indicate changing to left lane

C. indicate making a U turn ahead

D. indicate turning right ahead

Answer: D

25. Whats the role of the indicative marking?

A. No passing

B. indicate vehicles to pass

C. restrict from passing

D. warn and remind

Answer: B