郴州驾考英文版下载

1. Whats the meaning of this sign?

A. stopping temporarily is allowed

B. long stopping is allowed

C. no long stopping

D. no stopping

Answer: D

2. If the driver finds there is no vehicle following, he can change lanes without turning on the turn signal.

A. Right

B. Wrong

Answer: B

3. What causes the rear-end collision?

A. not observe through the rear-view mirror while the vehicle in front brakes

B. the vehicle in front brakes suddenly

C. distance from the vehicle in front is too close when the rear vehicle overtakes

D. not maintain a safe distance from the vehicle in front

Answer: D

4. What is this manipulation device?

A. switch of windscreen wiper

B. switch of the head lights

C. switch of the turn signal

D. switch of defogger

Answer: A

5. It lights continuously to indicate that engine control system failed.

A. Right

B. Wrong

Answer: A

6. When a motorized vehicle goes at night through an intersection that has no traffic lights, the driver should not use the high and low beam lights alternately.

A. Right

B. Wrong

Answer: B

7. The main impact of mountain roads on safe driving is _______.

A. The traffic conditions are boring

B. The slopes are long, the curves are sharp and visibility range is shorter.

C. The traffic flow is heavy

D. The road signs are fewer

Answer: B

8. When a vehicle passes a sharp curve, it may overtake if traffic is light.

A. Right

B. Wrong

Answer: B

9. When driving on a mountain road covered by ice and snow, the vehicle behind should ______ if the vehicle in front is climbing a slope.

A. Climb slowly

B. Closely follow and climb

C. Select a proper place to stop and climb after the vehicle in front has passed

D. Rapidly overtake the vehicle in front

Answer: C

10. Traffic markings are divided into indication, warning and prohibition.

A. Right

B. Wrong

Answer: A

11. Whats the meaning of this sign?

A. embankment road

B. dangerous hillside road

C. rock-falling road

D. cliffside road

Answer: B

12. Use the high and low beam lights alternately when passing the crosswalk at night.

A. Right

B. Wrong

Answer: A

13. It lights to indicate that ______

A. engine compartment is opened

B. cover of fuel tank is opened

C. doors of both sides are opened

D. luggage compartment is opened

Answer: C

14. Whats the meaning of this sign?

A. no left turn

B. dead-end road

C. no passing

D. bypass if overheight

Answer: D

15. How to make a U turn in this intersection?

A. broken lines of the central line

B. make a U turn from the right lane

C. enter the intersection and make a U turn

D. make a U turn in the crosswalk

Answer: A

16. It lights to indicate that ______

A. the tail fog light is turned on

B. the low beam light is turned on

C. the high beam light is turned on

D. the head fog light is turned on

Answer: A

17. What does this symbol indicate?

A. switch of high beam lights

B. switch of the low beam lights

C. master switch of vehicle lights

D. the switch of tail fog light

Answer: C

18. After starting the engine, it lights to indicate that ______

A. fuel pump abnormal or malfunction

B. ignition system malfunction

C. fuel supply system is abnormal

D. fuel in tank reaches the minimum level

Answer: D

19. Whats the meaning of this sign?

A. special lane for small vehicles

B. special lane for motorized vehicles

C. special lane for taxis

D. special lane for multi-passenger vehicles

Answer: D

20. What is the max speed when in or out of the lane for non-motorized vehicles?

A. 40km/hr

B. 50km/hr

C. 60km/hr

D. 30km/hr

Answer: D

21. If a vehicle has the right of way at an intersection but encounters a vehicle cutting in, the driver should _________.

A. Rush to pass

B. Speed up in advance and pass

C. Reduce speed and evade, or stop to yield when necessary

D. Go forward at the normal speed according to the right of way and refuses to evade

Answer: C

22. It displays the current engine speed is 6000 rev / min.

A. Right

B. Wrong

Answer: B

23. Whats the meaning of this guide arrow?

A. left curve or need to merge with the left flow ahead

B. right curve or need to merge with the right flow ahead

C. merge with the left flow due to right side obstacle ahead

D. left curve or need to bypass from left side ahead

Answer: A

24. When reaching a sharp curve, the driver should reduce speed and drive on the right side so as to avoid colliding with the vehicle crossing the central line of the curve in the opposite direction.

A. Right

B. Wrong

Answer: A

25. Let the straight-going vehicle go first at this intersection.

A. Right

B. Wrong

Answer: A