延安驾驶证英文对照

1. After a vehicle enters a mountain road, it should pay special attention to the continuous curves sign. In addition, it should voluntarily evade vehicles and pedestrians, reduce speed in a time manner and honk in advance.

A. Right

B. Wrong

Answer: A

2. May throw items to the road while driving.

A. Right

B. Wrong

Answer: B

3. It lights when the handbrake is pulled up.

A. Right

B. Wrong

Answer: A

4. Whats the meaning of this sign?

A. expressway public phone

B. expressway police phone

C. expressway emergency phone

D. expressway rescue phone

Answer: C

5. No U turn at this section.

A. Right

B. Wrong

Answer: B

6. A qualified driver should not only be technically adept, but more importantly have good driving habits and ethical attainments.

A. Right

B. Wrong

Answer: A

7. A motorized vehicle can make a U turn on this road as long as it does not interfere other vehicles.

A. Right

B. Wrong

Answer: A

8. A motorized vehicle driver who drives more than 50% faster than the prescribed speed limit is subject to a 12-point penalty.

A. Right

B. Wrong

Answer: A

9. Whats the meaning of this sign?

A. flat intersection

B. flat ring intersection

C. attention to interactive intersection

D. attention to separate intersection

Answer: D

10. Whats the meaning of this sign?

A. no long time honking

B. honk discontinuously

C. reduce speed and honk

D. no honking

Answer: D

11. Whats the meaning of this sign?

A. Passing on both sides

B. Passing by the right side

C. Passing by the left side

D. Passing is prohibited

Answer: C

12. When a motorized vehicle breaks down at night, and is difficult to move, the driver should turn on the hazard lights, the contour lights and the tail lights.

A. Right

B. Wrong

Answer: A

13. What is the max speed when visibility is less than 50m due to foggy, rainy or snowy?

A. 70km/hr

B. 50km/hr

C. 40km/hr

D. 30km/hr

Answer: D

14. 7.When a vehicle changes lane before an intersection, the driver should do so ______.

A. In the area marked by solid lines before the intersection

B. In the area marked by solid lines in the intersection

C. In the area marked by broken lines as indicated by the guide arrow

D. Before the stop line at the intersection

Answer: C

15. Whats the meaning of this sign?

A. expressway next exit ahead

B. expressway right exit ahead

C. expressway left exit ahead

D. expressway destination indication

Answer: C

16. When driving in a foggy day, the driver should turn on ______.

A. The reverse light

B. The low beam light

C. The fog light

D. The high beam light

Answer: C

17. When a vehicle goes downhill, it may fully use the neutral gear and slide.

A. Right

B. Wrong

Answer: B

18. From which side to overtake?

A. both sides

B. right side

C. left side

D. the side with no obstacle

Answer: C

19. Whats the meaning of this sign?

A. Passing on both sides

B. Passing is prohibited

C. Passing by the left side

D. Passing by the right side

Answer: A

20. What is this manipulation device?

A. the handbrake

B. the air throttle lever

C. the gear lever

D. the clutch lever

Answer: C

21. Cannot make a U turn in this section.

A. Right

B. Wrong

Answer: A

22. What causes the rear-end collision?

A. not observe through the rear-view mirror while the vehicle in front brakes

B. the vehicle in front brakes suddenly

C. distance from the vehicle in front is too close when the rear vehicle overtakes

D. not maintain a safe distance from the vehicle in front

Answer: D

23. How to use light in this situation at the intersection?

A. turn off high beam lights

B. use hazard lights

C. use the high and low beam lights alternately

D. use high beam lights

Answer: C

24. Which part does it control when rotating this part of the switch?

A. the low beam lights

B. the head and tail fog lights

C. high beam lights

D. turn signals

Answer: B

25. When driving at night on a road with no or poor lighting, the driver should switch from the low beam light to the high beam light. But the vehicle following in the same direction is not allowed to use the high beam light.

A. Right

B. Wrong

Answer: A