毫州驾驶证英文对照

1. When a vehicle starts to move, the driver should first turn on the low beam light.

A. Right

B. Wrong

Answer: A

2. If one drives an illegally assembled motorized vehicle, he should not only pay the fine, but also ________ .

A. be temporarily detained the driving license

B. be revoked the driving license

C. be held for criminal liabilities

D. be detained for less than 10 days

Answer: B

3. The motorized vehicle driver is not allowed to drive a motorized vehicle when his driving license is detained.

A. Right

B. Wrong

Answer: A

4. Whats the meaning of the white solid lines at the edge of the carriageway on both sides of the road?

A. Vehicles may cross temporarily

B. Vehicles are not allowed to cross.

C. Motorized vehicles may cross temporarily.

D. Non-motorized vehicles may cross temporarily

Answer: B

5. May turn right in this situation.

A. Right

B. Wrong

Answer: B

6. At this position, the motorized vehicle can continue to go through if the front wheels have passed the stop line.

A. Right

B. Wrong

Answer: B

7. Traffic markings are divided into indication, warning and prohibition.

A. Right

B. Wrong

Answer: A

8. It lights to indicate that engine compartment is opened.

A. Right

B. Wrong

Answer: B

9. ABS system can keep the steering capability of the front wheels while providing maximum braking force when the vehicle conduct an emergency braking.

A. Right

B. Wrong

Answer: A

10. What marking is the combination of the white broken lines and the triangle area?

A. road entry marking

B. lane-dividing line that can be crossed

C. deceleration line at road exit

D. road exit marking

Answer: D

11. Continue to go through if having passed the stop line when encountering this traffic light at the intersection.

A. Right

B. Wrong

Answer: A

12. When driving at night on a road with no or poor lighting, the driver should switch from the low beam light to the high beam light. But the vehicle following in the same direction is not allowed to use the high beam light.

A. Right

B. Wrong

Answer: A

13. What marking are the white serrated solid lines in the circle?

A. guide lane lines

B. direction guide line

C. variable guide lane line

D. one-way driving line

Answer: C

14. After entering the acceleration lane of an expressway, the driver should increase the speed to more than _________ per hour.

A. 50

B. 60

C. 30

D. 40

Answer: B

15. Which is subject to a 12-point penalty?

A. driving a motorized vehicle when driving license is temporarily detained

B. applying for reissuing the driving license by concealment or deception

C. not yielding to the school bus according to regulations

D. running with the license plate deliberately stained

Answer: D

16. Before the motorized vehicle runs on the road, the driver should check the safety and technical performance of the vehicle.

A. Right

B. Wrong

Answer: A

17. The validity of the driving license is divided into 6-year, 10-year and 20-year.

A. Right

B. Wrong

Answer: B

18. The contents of subject 2 test for small motor vehicle include Reversing stall parking, stopping at the appointed position and setting off on a slope, pulling over, driving by S-shaped line, sharp turning.

A. Right

B. Wrong

Answer: A

19. When a vehicle merges with the traffic flow, the driver should turn on the turn signal in advance, go straight, observe the traffic conditions on both sides through the rear-view mirror, and merge with the traffic flow if it is safe to do so.

A. Right

B. Wrong

Answer: A

20. As the road is wet and slippery after rain, brake application when driving can easily ___.

A. Cause sideways slide and traffic accident

B. Cause collision due to poor visibility

C. Be ignored by the drivers of other vehicles

D. Cause engine kill

Answer: A

21. It lights when turning on the front low beam lights.

A. Right

B. Wrong

Answer: B

22. If discovering pedestrians abruptly cross the road while driving, the driver should immediately reduce speed and evade.

A. Right

B. Wrong

Answer: A

23. How to do while entering this intersection?

A. shift the high and low beam lights alternately to remind the cars already in the intersection to yield

B. quickly cut in the cars already in the intersection

C. let the cars already in the intersection go first

D. honk and enter directly

Answer: C

24. Whats the meaning of this sign?

A. line guide signs

B. lane merging guide signs

C. lane branching guide signs

D. turning guide signs

Answer: A

25. Whats the meaning of this sign?

A. Passing on both sides

B. Passing is prohibited

C. Passing by the left side

D. Passing by the right side

Answer: A