兴安2026科目一考试英文版

1. Whats the meaning of the yellow slash filled area in the middle of the road?

A. one-way lanes dividing line

B. opposite direction lanes dividing line that can not be crossed

C. bilateral same direction lanes dividing line that can be crossed

D. opposite direction lanes dividing line that can be crossed

Answer: B

2. Whats the meaning of this sign?

A. hump bridge

B. high outburst road

C. low-lying road

D. bump road

Answer: A

3. Whats the role of the indicative marking?

A. No passing

B. indicate vehicles to pass

C. restrict from passing

D. warn and remind

Answer: B

4. In which situation that a driver cannot drive?

A. after drinking coffee

B. after drinking milk

C. after drinking

D. after drinking tea

Answer: C

5. How to use lights at night while crossing each other on narrow road or bridge?

A. turn off all the lights

B. turn on the low beam lights

C. turn off the head lights

D. turn on high beam lights

Answer: B

6. The rear windshield defroster starts to work after pressing this switch.

A. Right

B. Wrong

Answer: B

7. No U turn at this section.

A. Right

B. Wrong

Answer: B

8. Whats the meaning of this sign?

A. bump road

B. high outburst road

C. low-lying road

D. hump bridge

Answer: B

9. What device does the switch of this symbol control?

A. the windscreen defrosting

B. the rear window wiper

C. the rear window defrosting

D. the windscreen wiper

Answer: D

10. Whats the meaning of this sign?

A. overflowing bridge

B. ferry

C. pier

D. overflowing road

Answer: B

11. This small car can not stop here.

A. Right

B. Wrong

Answer: A

12. It lights to indicate that ______

A. ABS system malfunction

B. handbrake is released

C. braking system malfunction

D. safety bags malfunction

Answer: A

13. What is the max speed when down slope, turning around and U turn?

A. 50km/hr

B. 60km/hr

C. 30km/hr

D. 40km/hr

Answer: C

14. How to use lights when pulling over on road?

A. turn on the hazard lights

B. turn on the right-turn signal in advance

C. use the high and low beam lights alternately

D. not need to use any light to indicate

Answer: B

15. Whats the meaning of this sign?

A. the distance from the tunnel exit

B. the distance from the tunnel entry

C. the distance of following the vehicle in front in the tunnel

D. the whole length of the tunnel

Answer: A

16. How to run through this intersection?

A. honk to let it yield

B. directly speed up to make a turn

C. reduce speed and turn slowly

D. yield the car coming from left

Answer: D

17. When a vehicle enters a two-way tunnel, the driver should turn on ________.

A. The hazard lights

B. The high beam light

C. The fog light

D. The width light or the low beam light

Answer: D

18. If a motorized vehicle breaks down or causes a traffic accident on the expressway and cannot to run normally, the vehicle should be towed by ______.

A. a vehicle passing by

B. a large bus

C. a vehicle traveling together

D. a tow truck

Answer: D

19. Whats the meaning of this sign?

A. No passing

B. driving at reduced speed

C. time limit for entering

D. no entering

Answer: A

20. What is the Minimum speed on this expressway?

A. 100km/hr

B. 80km/hr

C. 60km/hr

D. 50km/hr

Answer: C

21. Traffic Police can detain the driver according to law, if the driver drives a motorized vehicle which is suspected of reaching the write-off standard.

A. Right

B. Wrong

Answer: B

22. As the traffic flow at an interchange is generally one-way, the vehicles do not have to reduce speed when passing.

A. Right

B. Wrong

Answer: B

23. It lights to indicate that ______

A. the hazard lights flash

B. right-turn signal flashes

C. left-turn signal flashes

D. front and rear width lights flash

Answer: A

24. This sign warns obstacles ahead and reducing speed to bypass.

A. Right

B. Wrong

Answer: B

25. When driving a motorized vehicle uphill, you should speed up and honk when you going to reach the top of the slope.

A. Right

B. Wrong

Answer: B