崇左考驾驶证英文试题

1. When passing through an overflowing road, a high gear should be used to pass rapidly.

A. Right

B. Wrong

Answer: B

2. This sign reminds embankment road ahead.

A. Right

B. Wrong

Answer: B

3. Whats the meaning of this guide arrow?

A. going straight or U turn

B. going straight or left turn

C. going straight or changing to left lane

D. left turn or U turn

Answer: B

4. When a vehicle reaches a sharp curve, the driver should _______.

A. Brake suddenly and go slowly

B. Drive along the outer side of the curve

C. Fully reduce speed and drive on the right side

D. Go forward by borrowing the opposite lane

Answer: C

5. Whats the meaning of this sign?

A. the lane for non-motorized vehicles

B. yield non-motorized vehicles

C. no passing for non-motorized vehicles

D. watch for non-motorized vehicles

Answer: D

6. What is the max speed on this highway?

A. 30km/hr

B. 40km/hr

C. 50km/hr

D. 70km/hr

Answer: D

7. Whats the meaning of the white solid lines at the edge of the carriageway on both sides of the road?

A. Vehicles may cross temporarily

B. Vehicles are not allowed to cross.

C. Motorized vehicles may cross temporarily.

D. Non-motorized vehicles may cross temporarily

Answer: B

8. In which section when a vehicle runs is prohibited from overtaking.

A. elevated road

B. intersection

C. central streets

D. ring express

Answer: B

9. When a vehicle stops temporarily in a rainy day, the driver should turn on ______.

A. The head and tail fog lights

B. The hazard lights

C. The high beam light

D. The reverse light

Answer: B

10. Whats the meaning of this sign?

A. expressway bus station ahead

B. expressway shelter ahead

C. expressway service area ahead

D. expressway toll station ahead

Answer: C

11. It lights to indicate that ______

A. ABS system malfunction

B. handbrake is released

C. braking system malfunction

D. handbrake is pulled up

Answer: D

12. The main impact of mountain roads on safe driving is _______.

A. The traffic conditions are boring

B. The slopes are long, the curves are sharp and visibility range is shorter.

C. The traffic flow is heavy

D. The road signs are fewer

Answer: B

13. The validity of the Admission Form is _________

A. 1 year

B. 2 years

C. 3 years

D. 4 years

Answer: C

14. This sign warns a sharp left curve ahead.

A. Right

B. Wrong

Answer: A

15. If discovering pedestrians abruptly cross the road while driving, the driver should immediately reduce speed and evade.

A. Right

B. Wrong

Answer: A

16. On which kind of city road a vehicle is not allowed to overtake?

A. main streets

B. one-way section

C. section with heavy traffic flow

D. two one-way lanes

Answer: C

17. Speeding up to go though the intersection before the light turns to red in this case.

A. Right

B. Wrong

Answer: B

18. The wrong measure to avoid tire blowout is to _________.

A. Reduce tire pressure

B. Check the tires regularly

C. Remove objects from tire tread grooves in a timely manner

D. Replace the tire that has cracks or deep cuts

Answer: A

19. The red car can run in this lane.

A. Right

B. Wrong

Answer: B

20. What is this traffic sign?

A. slippery section

B. sharp curve

C. inverse curve

D. continuous curves

Answer: D

21. After entering the acceleration lane of an expressway, the driver should increase the speed to more than _________ per hour.

A. 50

B. 60

C. 30

D. 40

Answer: B

22. When a vehicle changes to the right lane, the driver should turn on the right-turn signal in advance, observe and enter the new lane if it is safe to do so.

A. Right

B. Wrong

Answer: A

23. A motorized vehicle is not allowed to stop in the section 50 meters to the bridge, steep slope or tunnel.

A. Right

B. Wrong

Answer: A

24. When the tire pressure is too low, the fast-running tire can change its shape like waves and increase its temperature, which in turn can cause ________.

A. Even lower tire pressure

B. Increases resistance to the vehicle

C. Tire blowout

D. Unstable tire pressure

Answer: C

25. What mark is the inclined yellow and black lines?

A. entity mark

B. protrusions mark

C. three-dimensional mark

D. deceleration mark

Answer: C