眉山考驾驶证英语试题及答案

1. What does this symbol indicate?

A. switch of high beam lights

B. switch of the low beam lights

C. master switch of vehicle lights

D. the switch of tail fog light

Answer: C

2. If a motorized vehicle driver has caused a major accident in violation of the traffic regulations which has caused serious injury, the driver is subject to a prison term of less than 3 years or a criminal detention.

A. Right

B. Wrong

Answer: A

3. What marking are the white serrated solid lines in the circle?

A. guide lane lines

B. direction guide line

C. variable guide lane line

D. one-way driving line

Answer: C

4. Continuously using the foot brake on a long downhill road ________.

A. Can shorten the engines service life

B. Increases the drivers labor intensity

C. Can drastically reduce the braking efficiency due to the rising temperature of the brake

D. Can easily cause vehicle overturn

Answer: C

5. What mark is the inclined yellow and black lines?

A. entity mark

B. protrusions mark

C. three-dimensional mark

D. deceleration mark

Answer: C

6. Before a vehicle enters an intersection, the driver should reduce speed, observe and make sure it is safe to do so.

A. Right

B. Wrong

Answer: A

7. You should speed up to change lane in front of the red car.

A. Right

B. Wrong

Answer: B

8. When encountering school children crossing the road in a queue, the driver should ______.

A. Speed up in advance and pass forcefully

B. Stop to yield

C. Reduce speed and go slowly

D. Continuously honk to urge them

Answer: B

9. A driver should observe the dynamic situation of the rear side vehicles before driving into the traffic flow from other road.

A. Right

B. Wrong

Answer: A

10. Whats the meaning of this sign?

A. intersection

B. ring intersection

C. T-shaped intersection

D. Y-shaped intersection

Answer: A

11. Opening the doors of a motorized vehicle should not obstruct the flow of other vehicles and pedestrians.

A. Right

B. Wrong

Answer: A

12. A motorized vehicle driver who uses falsified or altered driving license is subject to a 12-point penalty.

A. Right

B. Wrong

Answer: A

13. Driving a motorized vehicle in the city road which has no central line, the maximum speed can not exceed 50 kilometers per hour.

A. Right

B. Wrong

Answer: B

14. Stop the vehicle and observe when reaching the level crossing in this situation.

A. Right

B. Wrong

Answer: A

15. Whats the meaning of this sign?

A. stopping temporarily is allowed

B. long stopping is allowed

C. no long stopping

D. no stopping

Answer: D

16. A person whose driving license has been destroyed cannot drive a motorized vehicle.

A. Right

B. Wrong

Answer: A

17. Whats the meaning of the white markings on the road?

A. road construction marking

B. horizontal deceleration marking

C. vertical deceleration marking

D. fewer lanes indication marking

Answer: B

18. What is the max speed when down slope, turning around and U turn?

A. 50km/hr

B. 60km/hr

C. 30km/hr

D. 40km/hr

Answer: C

19. Whats the meaning of this sign?

A. reduce speed and go slowly

B. watch for danger

C. jammed section

D. accident-prone section

Answer: B

20. What kind of violation does this stopping car have?

A. stop occupying the lane for non-motorized vehicles

B. stop in the section with no stopping marking

C. stop at bus station

D. stop occupying sidewalk

Answer: C

21. Which part of the driver can be protected by the safety pillow when there is a rear-end collision?

A. waist

B. chest

C. head

D. neck

Answer: D

22. How to run in this situation?

A. stop and yield to the opposite car

B. turn on the left-turn signal and run on the left side

C. turn on the head lights to let the other side yield

D. speed up to bypass the obstacle and then cross the other vehicle

Answer: A

23. Driving a motorized vehicle on the expressway is not allowed to exceed the marked maximum speed.

A. Right

B. Wrong

Answer: A

24. When a motorized vehicle makes a U turn, turns around or goes down a slope, the maximum speed should not exceed 40 kilometers per hour.

A. Right

B. Wrong

Answer: B

25. What is the main role of the seat belt when there is a collision?

A. to protect the driver and passengers necks

B. to protect the driver and passengers chests

C. to reduce the injuries of the driver and passengers

D. to protect the driver and passengers waists

Answer: C