淮南2026年英文驾照考试题库

1. Whats the meaning of this sign?

A. reduce speed in tunnel

B. turn on the high beam lights in tunnel

C. turn on the light in tunnel

D. width light in tunnel

Answer: C

2. When the driver senses a tire blowout on the road, he should control the direction of the vehicle, gently depress the brake pedal to slowly reduce the speed and gradually park the vehicle steadily on the roadside.

A. Right

B. Wrong

Answer: A

3. The rear windshield defroster starts to work after pressing this switch.

A. Right

B. Wrong

Answer: B

4. What marking is the white solid lines in the circle?

A. guide lanes lines

B. variable guide lanes lines

C. direction guide lines

D. one-way driving lines

Answer: A

5. When driving in thick or extremely thick fog, the driver should ____ due to low visibility.

A. Turn on the head light and keep driving

B. Turn on the contour light, fog light and drive along the right side

C. Turn on the hazard lights and keep driving

D. Turn on the hazard lights, fog light, and stop at a safe place

Answer: D

6. Whats the meaning of this sign?

A. Passing on both sides

B. Passing by the right side

C. Passing by the left side

D. Passing is prohibited

Answer: C

7. If a person escapes after causing a traffic accident and constitutes a crime, his driving license should be revoked and he is banned _____ from re-obtaining a driving license.

A. within 5 years

B. within 10 years

C. within 20 years

D. for lifetime

Answer: D

8. The traffic lights allow the vehicle to ______

A. turn right

B. stop and wait

C. turn left

D. go straight

Answer: A

9. What device does the switch of this symbol control?

A. the windscreen defrosting or defogging

B. the rear window wiper and washer

C. the windscreen wiper and washer

D. the rear window defrosting or defogging

Answer: C

10. How to pass through the unmanned level crossing without traffic lights?

A. properly reduce speed to pass

B. slide over in the neutral gear

C. stop to make sure it is safe, then pass

D. speed up and pass as fast as possible

Answer: C

11. Whats the meaning of this sign?

A. watch for two-way road

B. driving by either side of the road

C. watch for variable lane

D. variable lane

Answer: C

12. When a vehicle on the main road approaches a conjunction with a feeder road, the driver should ______ in order to prevent a collision with a vehicle that suddenly enters from the feeder road.

A. Maintain the normal speed

B. Reduce speed in advance, observe and drive with care

C. Honk and swiftly pass

D. Speed up in advance and pass

Answer: B

13. The main impact of mountain roads on safe driving is _______.

A. The traffic conditions are boring

B. The slopes are long, the curves are sharp and visibility range is shorter.

C. The traffic flow is heavy

D. The road signs are fewer

Answer: B

14. The wrong measure to avoid tire blowout is to _________.

A. Reduce tire pressure

B. Check the tires regularly

C. Remove objects from tire tread grooves in a timely manner

D. Replace the tire that has cracks or deep cuts

Answer: A

15. Whats the meaning of this sign?

A. payment lane on the expressway

B. check lane on the expressway

C. card getting lane on the expressway

D. ETC lane on the expressway

Answer: D

16. When driving on a road covered by ice and snow, the driver must reduce speed and increase the safe distance.

A. Right

B. Wrong

Answer: A

17. Whats the meaning of the white solid line in the middle of the road?

A. unilateral same direction lanes dividing line that can be crossed

B. same direction lanes dividing line that can not be crossed

C. bilateral same direction lanes dividing line that can be crossed

D. opposite direction lanes dividing line that can not be crossed

Answer: B

18. Whats the meaning of the white broken lines area on the far left side?

A. special lane for multi-passenger vehicles

B. special lane for small buses

C. special lane for taxis with no passenger

D. special lane for large buses

Answer: A

19. The vehicle is allowed to pass the intersection ahead when the green light on.

A. Right

B. Wrong

Answer: A

20. Whats the meaning of this sign?

A. stop to yield

B. one-way road

C. going first when crossing each other

D. the opposite vehicle goes first when crossing each other

Answer: C

21. Before a motorized vehicle overtakes, the driver should turn on the left-turn signal, use the high and low beam lights alternately or honk in advance.

A. Right

B. Wrong

Answer: A

22. In such road sections, you can enter the cross-hatched marking area to wait.

A. Right

B. Wrong

Answer: B

23. What is the max speed on this city road?

A. 30km/hr

B. 40km/hr

C. 50km/hr

D. 70km/hr

Answer: C

24. Whats the meaning of this guide arrow on the road?

A. left curve or need to bypass from left side ahead

B. merge with the left flow due to obstacle ahead

C. right curve or need to merge with the right flow ahead

D. left curve or need to merge with the left flow ahead

Answer: C

25. Whats the meaning of the white markings on the road?

A. road construction marking

B. horizontal deceleration marking

C. vertical deceleration marking

D. fewer lanes indication marking

Answer: B