梅州科目一模拟考试英文版

1. Whats the meaning of this sign?

A. a manned level crossing

B. multi-crossing of railway and road

C. grade separation level crossing

D. an unmanned level crossing

Answer: A

2. Turn on the left-turn signal in advance when making a U turn on the road.

A. Right

B. Wrong

Answer: A

3. What should a motorized vehicle has while running on the road?

A. a label of keeping distance

B. a label of reminding danger

C. a label of inspection

D. a label of product qualification

Answer: C

4. Whats the meaning of this sign?

A. lane for both going straight and U turn

B. lane for both going straight and left turn

C. lane for going straight and right turn

D. lanes for going in different directions

Answer: B

5. Whats the meaning of this sign?

A. bypass at construction section

B. two-way traffic

C. bypass from left or right side

D. watch for danger

Answer: C

6. When a vehicle encounters a bike rider coming in the opposite direction on the road, the driver should _________.

A. Continuously change the high and low bean lights

B. Continuously honk

C. Use the low beam light, reduce speed or stop to evade

D. Use the high beam light

Answer: C

7. Whats the meaning of this sign?

A. reduce speed and go slowly

B. watch for danger

C. jammed section

D. accident-prone section

Answer: B

8. The driving license of 10-year validity will be issued if the penalty points never reached 12 points in every scoring cycle during the 6-year validity of the license.

A. Right

B. Wrong

Answer: A

9. Whats the meaning of this sign?

A. ring intersection ahead

B. intersection ahead

C. Y-shaped intersection ahead

D. T-shaped intersection ahead

Answer: C

10. Which kind of sign is it?

A. warning sign

B. prohibitive sign

C. indicative sign

D. directional sign

Answer: C

11. When a motorized vehicle crosses a non-motorized vehicle on a narrow road or a narrow bridge at night, the motorized vehicle should use the high beam light.

A. Right

B. Wrong

Answer: B

12. What pedal is it?

A. accelerator pedal

B. clutch pedal

C. handbrake

D. the brake pedal

Answer: A

13. When the traffic conditions at an intersection are complicated, the driver should be patiently waiting instead of taking chance.

A. Right

B. Wrong

Answer: A

14. No U turn at this section.

A. Right

B. Wrong

Answer: B

15. When encountering a traffic jam on the expressway, the driver should follow the front vehicle lining up, and immediately turn on the hazard light to prevent rear-end collision.

A. Right

B. Wrong

Answer: A

16. Whats the meaning of this sign?

A. stop to yield

B. no stopping temporarily

C. no entry

D. no long stopping

Answer: A

17. When driving on a road covered by ice and snow, the driver must reduce speed and increase the safe distance.

A. Right

B. Wrong

Answer: A

18. It flashes when turning on the hazard lights.

A. Right

B. Wrong

Answer: A

19. You should speed up through the section with this kind of traffic marking.

A. Right

B. Wrong

Answer: B

20. When the green arrow for a lane is on and there are still pedestrians in the crosswalk before the vehicle, the driver should ___________.

A. Directly start up and pass

B. Start up and bypass the pedestrians from behind

C. Start up and bypass before the pedestrians

D. Start up after the pedestrians have passed

Answer: D

21. Whats the meaning of this sign?

A. section narrows on both sides

B. section for speed test

C. section for ascertaining the distance between the vehicles

D. pay attentions to keeping distance

Answer: D

22. This sign reminds an unmanned level crossing ahead.

A. Right

B. Wrong

Answer: A

23. When overtaking, the driver should ________ if the vehicle in front refuses to reduce speed or yield.

A. Follow closely and find chance to overtake again

B. Stop overtaking

C. Speed up and continue to overtake

D. Continuously honk and speed up to overtake

Answer: B

24. Which part does it control when pulling this switch?

A. turn signals

B. reverse light

C. contour light

D. hazard light

Answer: A

25. ABS system can maximize the braking efficiency when conducting _______

A. braking intermittently

B. braking continuously

C. applying emergency braking

D. gently depressing the brake pedal

Answer: C