唐山2026考驾照英语试题

1. What pedal is it?

A. accelerator pedal

B. clutch pedal

C. handbrake

D. the brake pedal

Answer: A

2. When driving at night on a road with no or poor lighting, the driver should switch from the low beam light to the high beam light. But the vehicle following in the same direction is not allowed to use the high beam light.

A. Right

B. Wrong

Answer: A

3. As thick fog reduces visibility, turning on the high beam light can increase the visibility.

A. Right

B. Wrong

Answer: B

4. Whats the meaning of this sign?

A. watch for pedestrians

B. crosswalk

C. village or town

D. primary school

Answer: C

5. Which kind of sign is it?

A. warning sign

B. prohibitive sign

C. indicative sign

D. directional sign

Answer: C

6. Whats the meaning of this sign?

A. steep downhill road

B. continuous up slopes

C. steep uphill road

D. embankment road

Answer: C

7. This sign indicates intersection ahead.

A. Right

B. Wrong

Answer: B

8. Whats the meaning of this sign?

A. no honking the tweeter

B. no honking the woofer

C. should honk

D. no honking

Answer: C

9. May turn right in this situation.

A. Right

B. Wrong

Answer: B

10. How to do in this intersection?

A. wait in the cross-hatched marking area

B. stop and wait outside the intersection

C. follow the vehicle in front and pass

D. wait inside the intersection

Answer: B

11. The police can detain the vehicle if one drives a vehicle without ______

A. vehicle license

B. qualification certificate

C. ID card

D. pass paper

Answer: A

12. What marking is the combination of the white broken lines and the triangle area?

A. road entry marking

B. lane-dividing line that can be crossed

C. deceleration line at road entry

D. road exit marking

Answer: A

13. Whats the meaning of this sign?

A. more vehicles section

B. passing slowly

C. jammed section

D. construction section

Answer: B

14. When the motor vehicle installed ABS system brakes, the braking distance will be greatly shortened, so you do not have to keep a safe distance between vehicles.

A. Right

B. Wrong

Answer: B

15. Whats the meaning of this sign?

A. location and distance

B. driving route

C. destination name

D. driving direction

Answer: A

16. When starting up a vehicle stopping at the roadside, the driver should first ________.

A. Depress the accelerator pedal and start

B. Honk

C. Increase engine rotation speed

D. Observe the conditions around the vehicles

Answer: D

17. Which is incorrect when a motorized vehicle breaks down on the expressway?

A. place warning sign as required

B. passengers cannot get off

C. call the police at once

D. turn on the hazard lights

Answer: B

18. If a vehicle has the right of way at an intersection but encounters a vehicle cutting in, the driver should _________.

A. Rush to pass

B. Speed up in advance and pass

C. Reduce speed and evade, or stop to yield when necessary

D. Go forward at the normal speed according to the right of way and refuses to evade

Answer: C

19. Ignition switch in the ON position, the vehicle can not use electrical appliances.

A. Right

B. Wrong

Answer: B

20. When a vehicle passes a crosswalk, the driver should yield to the pedestrians.

A. Right

B. Wrong

Answer: A

21. What is the meaning of this sign?

A. provincial highway No.

B. national highway No.

C. county road No.

D. township road No.

Answer: A

22. When passing through an inundated road, the driver should ________.

A. Reduce speed and go slowly

B. Maintain the normal speed and pass

C. slide over in the neutral gear

D. Speed up and pass

Answer: A

23. It lights to indicate that ______

A. not buckled up

B. safety belt malfunction

C. the safety belts are too loose

D. buckled up already

Answer: A

24. When a vehicle on the main road approaches a conjunction with a feeder road, the driver should ______ in order to prevent a collision with a vehicle that suddenly enters from the feeder road.

A. Maintain the normal speed

B. Reduce speed in advance, observe and drive with care

C. Honk and swiftly pass

D. Speed up in advance and pass

Answer: B

25. 7.When a vehicle changes lane before an intersection, the driver should do so ______.

A. In the area marked by solid lines before the intersection

B. In the area marked by solid lines in the intersection

C. In the area marked by broken lines as indicated by the guide arrow

D. Before the stop line at the intersection

Answer: C