铜仁英文版考驾照

1. How to use lights when pulling over on road?

A. turn on the hazard lights

B. turn on the right-turn signal in advance

C. use the high and low beam lights alternately

D. not need to use any light to indicate

Answer: B

2. When a motorized vehicle encounters the cut in by another vehicle in a roundabout, the driver may not evade as long as he has the right of way.

A. Right

B. Wrong

Answer: B

3. No turning right when encountering this traffic light at the intersection.

A. Right

B. Wrong

Answer: B

4. When driving in windy, rainy, snowy, foggy and other complex weather conditions, the driver should turn on the head light, honk continuously and overtake rapidly if the vehicle in front goes slowly.

A. Right

B. Wrong

Answer: B

5. What is the max speed on this highway?

A. 70km/hr

B. 50km/hr

C. 40km/hr

D. 30km/hr

Answer: C

6. Whats the meaning of this sign?

A. left-turn lane

B. straight-going lane

C. right-turn lane

D. lanes for going in different directions

Answer: D

7. When encountering a traffic jam on the expressway, the driver should follow the front vehicle lining up, and immediately turn on the hazard light to prevent rear-end collision.

A. Right

B. Wrong

Answer: A

8. If the driver finds there is no vehicle following, he can change lanes without turning on the turn signal.

A. Right

B. Wrong

Answer: B

9. How long is the period of probation after a motorized vehicle driver obtains his driving license for the first time or the permission to drive higher level vehicles.

A. 6 months

B. 12 months

C. 2 years

D. 3 months

Answer: B

10. This motorized vehicle parked on the roadside has no illegal act.

A. Right

B. Wrong

Answer: B

11. What marking is the white solid lines in the circle?

A. guide lanes lines

B. variable guide lanes lines

C. direction guide lines

D. one-way driving lines

Answer: A

12. What should the driver do if conditions permit when a following vehicle gives the overtaking signal on a road without a central line?

A. maintain the original speed

B. speed up

C. reduce speed, move to the right side and yield

D. immediately stop and yield

Answer: C

13. When a vehicle enters a two-way tunnel, the driver should turn on ________.

A. The hazard lights

B. The high beam light

C. The fog light

D. The width light or the low beam light

Answer: D

14. Whats the meaning of this sign?

A. special lane for large buses

B. special lane for multi-passenger vehicles

C. special lane for public buses

D. special lane for BRT vehicles

Answer: D

15. This sign warns the driver to run slowly with care and beware of the vehicles from horizontal road.

A. Right

B. Wrong

Answer: A

16. Whats the meaning of this sign?

A. reduce speed in tunnel

B. turn on the high beam lights in tunnel

C. turn on the light in tunnel

D. width light in tunnel

Answer: C

17. Whats the meaning of this sign?

A. intersection ahead

B. interchange ahead

C. Y-shaped intersection ahead

D. ring intersection ahead

Answer: D

18. It is illegal for a driver to use a cell phone while driving.

A. Right

B. Wrong

Answer: A

19. One can drive the small motor vehicle with automatic transmission if the authorized vehicle applied for is small motor vehicle.

A. Right

B. Wrong

Answer: A

20. Within the validity of the Admission Form, the times of test reservation for Driving Skills of subject 2 and subject 3 can not exceed ______

A. 3 times

B. 4 times

C. 5 times

D. 6 times

Answer: C

21. How to use lights when changing to the left lane on road?

A. turn on the right-turn signal in advance

B. not need to turn on any turn signal

C. turn on the left-turn signal in advance

D. turn on the low beam lights in advance

Answer: C

22. In which situation cannot overtake a vehicle in front?

A. vehicle in front is reducing speed to yield

B. vehicle in front is turning left

C. vehicle in front is pulling over by the roadside

D. vehicle in front is turning right

Answer: B

23. Is there any effective auxiliary method to control the speed while driving on a long downhill road besides braking.

A. Shift to the neutral gear and slide

B. Use the engine to brake

C. Turn off the engine and slide

D. Depress the clutch and slide

Answer: B

24. Whats the meaning of this sign?

A. stop and yield the right side vehicle while crossing each other

B. no passing on the right side road

C. two-way lane section ahead

D. stop and yield the opposite vehicle while crossing each other

Answer: D

25. What marking is the combination of the white broken lines and the triangle area?

A. road entry marking

B. lane-dividing line that can be crossed

C. deceleration line at road entry

D. road exit marking

Answer: A