吕梁驾考科目一英文版

1. Driving a motorized vehicle on the road should be required to be with a license plate.

A. Right

B. Wrong

Answer: A

2. Whats the meaning of this sign?

A. expressway entry ahead

B. expressway ending ahead

C. expressway beginning ahead

D. expressway exit ahead

Answer: A

3. What marking is it?

A. prohibitive area

B. cross-hatched marking

C. guide line

D. central circle

Answer: D

4. Before the motorized vehicle runs on the road, the driver should check the safety and technical performance of the vehicle.

A. Right

B. Wrong

Answer: A

5. Whats the meaning of this sign?

A. expressway mileage No.

B. expressway border plate No.

C. expressway name No.

D. expressway section No.

Answer: C

6. A driver who drives an illegally assembled motorized vehicle is subject to ______ .

A. being held for criminal liabilities according to law

B. a fine of 200 yuan ~ 2,000 yuan

C. being revoked the vehicle license

D. being detained for less than 15 days

Answer: B

7. Whats the meaning of the white rectangle marking?

A. special space for taxicabs to take and drop passengers

B. horizontal parking space

C. inclined parking space

D. vertical parking space

Answer: B

8. Whats the meaning of this sign?

A. observation deck

B. car park

C. rest area

D. parking space

Answer: A

9. When driving at night on a road with no or poor lighting, the driver should switch from the low beam light to the high beam light. But the vehicle following in the same direction is not allowed to use the high beam light.

A. Right

B. Wrong

Answer: A

10. The passenger in the front seat does not need to buckle up when a motorized vehicle runs.

A. Right

B. Wrong

Answer: B

11. What kind of behavior of this driver violates the law?

A. not hold the steering wheel according to regulation

B. angle of the seat is not correct

C. not buckled up

D. the driving posture is incorrect

Answer: C

12. It lights to indicate that engine compartment is opened.

A. Right

B. Wrong

Answer: B

13. When a tire blows out suddenly on the road, the driver should refrain from violently depressing the brake pedal in panic. Instead, he should try his best to shift the gear to a low position and use the engine braking to reduce the speed of the vehicle.

A. Right

B. Wrong

Answer: A

14. This set of the hand signals of the traffic police indicates that the vehicles should ___ .

A. wait to turn left

B. pull over

C. reduce speed and pass slowly

D. turn left

Answer: D

15. What marking is the white solid lines in the circle?

A. guide lanes lines

B. variable guide lanes lines

C. direction guide lines

D. one-way driving lines

Answer: A

16. What is the max speed on a road covered by ice and snow

A. 50km/hr

B. 40km/hr

C. 30km/hr

D. 20km/hr

Answer: C

17. When the light switch is rotated to the position, the whole car lights turn on.

A. Right

B. Wrong

Answer: B

18. This sign warns the driver there is a crosswalk ahead.

A. Right

B. Wrong

Answer: B

19. Whats the meaning of this sign?

A. T-shaped intersection ahead

B. road branching point ahead

C. Y-shaped intersection ahead

D. intersection ahead

Answer: A

20. When a vehicle wades across the water, the driver should maintain a low speed, and _____ the brake pedal so as to restore the braking efficiency.

A. Continuously and strongly depress

B. Intermittently and strongly depress

C. Continuously and gently depress

D. Intermittently and gently depress

Answer: D

21. When a motorized vehicle breaks down at night, and is difficult to move, the driver should turn on the hazard lights, the contour lights and the tail lights.

A. Right

B. Wrong

Answer: A

22. You can make an U turn at this intersection.

A. Right

B. Wrong

Answer: B

23. A rear tire blowout can sway the tail of the vehicle. The driver should firmly hold the steering wheel with both hands to ensure the vehicle go straight, reduce speed and then stop.

A. Right

B. Wrong

Answer: A

24. When the fire engine, ambulance and wrecker are executing an emergency task, other vehicles should yield.

A. Right

B. Wrong

Answer: A

25. What mark is the inclined yellow and black lines?

A. entity mark

B. protrusions mark

C. three-dimensional mark

D. deceleration mark

Answer: C